Tektronix / CDS 73A-308 Relay and High Voltage Logic Driver Module
  • Tektronix_CDS_73A_308_View1_20141211175417
  • Tektronix_CDS_73A_308_View2_20141211175417
  • Tektronix_CDS_73A_308_View3_20141211175417
  • Tektronix_CDS_73A_308_View4_20141211175417

Tektronix / CDS 73A-308 Relay and High Voltage Logic Driver Module



Configuration:
• Option: STD




Have a quote from somewhere else? Click Here
Stock # 53568-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Tektronix / CDS 73A-308 Relay and High Voltage Logic Driver Module

Features
  • 80 Open Collector Output Channels
  • Relays May be Controlled Individually in Banks of 8 or All Simultaneously
  • Full Access to System Status Information

Description

The Tektronix / Colorado Data Systems (CDS) 73A-308 Relay and High Voltage Logic Driver Module is a printed circuit board assembly for use in a card cage conforming to the VXIbus Specification. The 73A-308 provides 80 open collector 300 milliamp relay drivers. The 80 programmable lines are organized as ten banks of eight relay drivers.

Each of the ten banks can be independently configured and responses are in ASCII hex notation for ease of programming, and to insure compatibility with the widest range of system controllers.

The outputs can be controlled as individual relay drivers and as banks of relay drivers. Output is controlled by commands, a VXIbus TTL trigger line, or an IEEE-488 Group Execute Trigger.

Relay driver lines can be set inactive (tri-state) or active low under program control. All lines are capable of up to 300mA of sink current per output, with a maximum voltage drop of 500 mV across the output to common. The 80 drivers have built-in transient suppression diode or clamp diodes to eliminate voltage spikes created when relays turn off.

There are two output connectors on the 73A-308, P4 and P5. Each connector has the outputs of 40 drivers, two clamp diode lines, and eight grounds. The clamp diode lines may be jumpered to any of the five blocks of eight outputs (a single UDN-2596A driver chip is a block of eight drivers).

The 73A-308 provides full access to system status information, which is especially helpful during system trouble-shooting, software de-bugging, and operational system checks. At any time, the system controller can read the state of the relay driver outputs and up-to-date error data.


Product Family: 73A-308, 73A308, 73A 308


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Tektronix / CDS 73A-308 Relay and High Voltage Logic Driver Module


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Tektronix / CDS 73A-308 User Manual (pdf) 
Link to Tektronix / CDS Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 53568-2 - Tektronix / CDS 73A-308 Relay and High Voltage Logic Driver Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html