Newport Burn-In System Controller Laptop

Newport Burn-In System Controller Laptop

This Newport Burn-In System Controller Laptop is used and in good condition. This unit has the Newport Laser Control System Software, v2.93f installed. This unit does not include the NI PCMCIA-GPIB required for remote operation of the Newport mainframes. The battery on this unit is included, however it does not hold charge well. The laptop is fully functional while plugged into wall voltage. We recommend replacing the battery if the laptop is going to be used as a portable system controller. Please contact Gateway (the manufacturer of the laptop) for replacement battery part number and pricing.

• Gateway Solo Pro 9300 Laptop/Notebook
• Intel Pentium III, 650 MHz Processor
• 10 GB Hard Drive
• 128 MB RAM
• 100-240 VAC AC-Adapter
• 3COM 10/100 PCMCIA LAN Card with Cable
• Windows NT 4.0 SP6
• Newport Laser Control System Software, v2.93f
• APC PowerChute Plus, v3.2
• NI-488.2 v1.60
• MS Office 2000 Professional SR-1
• Seagate Crystal Reports 7

The software listed above is loaded onto the system, and does not include the CD media. This system's hardware and software configuration is preserved, as it was originally used. As the end user, it will be the user's responsibility to comply with any non-transferable software licensing issues and delete any software that is deemed non-transferable. Upon request, we can delete and format the hard drive prior to shipping for a $20 fee.

Have a quote from somewhere else? Click Here
Stock # 54219-26
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Newport Laser Diode Drawers and Burn-In Accessories

  • Various Newport Laser Diode Drawers
  • Wide Rage of Burn-In Accessories


Newport 8-Channel Butterfly Fixture Drawer (Model Number: 8-CHBF or 8CHBF)

The Newport 8-Channel Butterfly Fixture Drawer (8-CHBF or 8CHBF) holds up to (8) 14-pin laser diode, pigtail packages. Because each package can have its own unique pin-out configuration, the Newport 8-CHBF has a 28 pin, zero-inserion-force (ZIF) jumper block socket to allow any package to communicate with the system. If you do not want to use a PCB that fits the ZIF, jumper wires from pin to pin. Then simply connect your packages' pin-outs to the pre-set Newport configuration.

The pigtail bare fiber is then aligned via a bare fiber holder to the photodiode detector. In addition to TEC's, the drawer has two ports on the back plane to connect to a water circulator. If you provide good water flow, a circulator, in addition to working just as good as a TEC and its driver, is much cheaper.

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Newport Laser Diode Drawers and Burn-In AccessoriesNewport Laser Diode Drawers and Burn-In AccessoriesNewport Laser Diode Drawers and Burn-In Accessories
Newport Laser Diode Drawers and Burn-In Accessories

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 54219-26 - Newport Burn-In System Controller Laptop

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)