Guzik RWA-1601+PRML 200 Mbit/s Digital Channel Analyzer
  • Guzik_RWA1601_PRML_View3
  • Guzik_RWA1601_PRML_View4
  • Guzik_RWA1601_PRML_View1
  • Guzik_RWA1601_PRML_View2

Guzik RWA-1601+PRML 200 Mbit/s Digital Channel Analyzer



This Guzik RWA-1601+PRML 200 Mbit/s Digital Analyzer is used and in excellent condition. This unit is also labeled as RWA-1632.

The Guzik RWA-1601+ (Digital Channel Analyzer) provides the capabilities of Guzik RWA-1601 plus PRML (Partial Response Maximum Likelihood) channel evaluation. PRML channel testing can be customized to use any PRML channel chip. Analog signals are digitized and digitally processed by the hardware with clock recovery.

Options Installed:
• Clock Recovery: Yes
• ADC 2000: Yes
• High Speed PG: Yes
• Chip Adapter: 320
• ERA Interface: Yes

Interfaces:
• RDX/RDY In
• R/W Data
• R/W Control
• DRV Servo CLK
• Drive Control
• Computer
• Output: Index, Scope 1, Scope 2, Scope 3, Scope 4, Sync
• Input: Sector In, Index In
• Power Out
• AC Input

View Photo of the front panel.
View Photo of the front of the unit.
View Photo of the back panel.
View Photo of the back of the unit.




Have a quote from somewhere else? Click Here
Stock # 54401-8
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Guzik S1701 Spinstand and Components

Features
  • Micropositioning System with Positioning Repeatability of 1 µIn
  • Programmable Speeds from 200-10,000 RPM
  • Compact, Table-Top Spin-Stand Instrument

Description

The Guzik S-1701MP Micro Positioning Spinstand is equipped with a patented closed loop positioning system consisting of a piezo substage and precision optical scales with 0.04 µIn resolution. This results in track positioning repeatability of 1 µIn and track profile measurements with effectively zero hysteresis. This capability is a requirement in MR-Head testing and high TPI track profile and track interference analysis.

By locating the head gap in the center of a rotational system, skew angle control is accomplished by rotating the head around the head gap. In this manner the skew angle can be changed while remaining on the same track.

The unique capability of changing skew angles while remaining on track allows the user to perform a variety of measurements, including track profile analysis on a previously written track at varying skew angles. This unique measurement can produce a comb-shaped single-track profile plot.

Through a very simple mechanical conversion, the S-1701MP can be used for either head (HGA) or head stack (HSA) testing.

S-1701MP Features
• Universal Micro Positioning Spinstand Equipped for HGA, HSA, and Disk Testing
• Positioning Repeatability of 1 µIn with 0.04 µIn Resolution
• Air or Ball Bearing Spindles with Programmable Speeds from 200-10,000 RPM
• Table Top Unit


Product Family: RWA-1632, RWA1632, RWA 1632


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Guzik S1701 Spinstand and Components
54401-1
Guzik S1701 Spinstand and Components
54401-1
Guzik S1701 Spinstand and Components
54401-1
Guzik S1701 Spinstand and Components
54401-1
Guzik S1701 Spinstand and Components
54401-1
Guzik S1701 Spinstand and Components
54401-1


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 54401-8 - Guzik RWA-1601+PRML 200 Mbit/s Digital Channel Analyzer


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html