Astronics / EADS / Racal 1003 Power Controller

Astronics / EADS / Racal 1003 Power Controller

This Racal 1003 Power Controller is used, and in excellent condition. It plugs into 208V 3-Phase and distributes the power to several 120VAC outlets. It is for distributing 120VAC power within a rack where the rack's total power consumption exceeds normal 120VAC current/power capabilities. There is a 30 Amp (per phase) 3-Phase breaker on the rear. There are (2) dual 120VAC switched outlets for each phase, as well as one 120VAC unswitched outlet. The front panel has AC Power On & Off switches, as well as an Emergency Off button with an adjacent Reset switch. There is also a 15-Pin D-type connector and a small fuse assembly on the side of the unit.

For a picture with the top cover removed click here

For a picture of the rear of the unit click here

Have a quote from somewhere else? Click Here
Stock # 54667-3
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Astronics / EADS / Racal Rackmount Power Supplies and Controllers

  • Multi-Output Linear Power Supply
  • 19" Rackmountable Aluminum Chassis w/ Handles
  • Standard 115VAC Power Input
  • Integrated Fan, Fuses, and Solid State Relays


Racal Instruments manufactures custom rackmount test instruments for customers, and Rackmount Power Supplies are an integral part of these systems.

The Racal 5012 and 5011 Series Instruments are multi-output power supplies built with the following off-the-shelf components: linear power supplies, solid state relays, AC input filter, fan, and fuse bank. These components are integrated into an aluminum housing that is 19" rack mountable. These power supply boxes are great if you need some or all of the voltage outputs available for your equipment. The bottom line is that these units can save you time in development. The voltage outputs go to standard 'D' type output connectors on the rear of the case. The solid state relay control inputs also map to the rear 'D' connectors. It would be very easy to bypass the solid state relays if you would just want all of the power supplies to power on/off as the AC input voltage is applied. The solid state relays allow user control over individual or similarly-wired groups of power supplies in the chassis - the topology of the wiring can be easily redone by the end user. There are no other unnecessary electronics to further complicate the design - just prewired linear power supplies in a box with AC Input, Fan, Relays, Fuses, and Output Connectors. Linear type power supplies have very clean output power (they are not programmable/variable). Linear power supplies also have non-referenced isolated outputs (user grounding topology determines whether the output voltage is + or -).

The Racal 5017 and 5018 Power Supply Modules come with Power-One power supplies. Power-One’s high power modular products can be configured to provide up to 21 outputs in over 10 million voltage and current combinations. Eighteen chassis are available from 1000 to 4000 watts; including power factor corrected three-phase input, and metric mounting hardware models. Over 90 output modules are available to provide voltages from 1 to 48VDC. Output modules have a field demonstrated MTBF of greater than 5 million hours. Other features include a comprehensive array of module and system interface signals, extensive input transient protection, and international regulatory agency approvals. These high-performance products have a proven track record in high reliability communications, semiconductor test, and industrial applications.

The Racal 5013 Power Supply Modules come with 4 International Power and 1 Power One power supplies. The International Power supplies are IHB12-1.7 with output 12VDC at 1.7AMPS; IHB5-3/OVP with output 5VDC at 3.0AMPS w/OVP; IHB5-3/OVP with output 5VDC at 3.0AMPS w/OVP; IHB24-1.2 with output 24VDC at 1.2 AMPS. The Power One power supply is HB5-3/OVP-A with output 1.2-2.5VDC at 1.8AMPS w/OVP. In addition there are two larger International Power supplies; both are IF5-25/OVP-512 with output 5VDC at 25AMPS w/OVP. The final internal power supply is a National Power IF15-15 with output 15VDC at 15AMPS or 12VDC at 16AMPS. There are two Potter & Brumfield Solid State Relays Model SSR-240D25. With excellent cooling and airflow this high-performance product has a proven track record in high reliability communications, semiconductor test, and industrial applications.

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Astronics / EADS / Racal Rackmount Power Supplies and Controllers
Astronics / EADS / Racal Rackmount Power Supplies and Controllers

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 54667-3 - Astronics / EADS / Racal 1003 Power Controller

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)