National Instruments PCMCIA-DNET PSH15-C6 Cable

National Instruments PCMCIA-DNET PSH15-C6 Cable



Part Number: 186855C-01

Product Family: NI-DNET, PCMCIA-DNET, Device Net, DeviceNet

NI forums has the following information regarding the PSH15-C6:
Q: "Must I connect V+ in my low speed port (CAN/DS) if i use a PCMCIA CAN/2?"

A: "You must have the Two port low speed cable adapter, part number: 186855C-01. In this cable the transceiver is internally powered, so there is no need to power the transceiver from the bus."




Have a quote from somewhere else? Click Here
Stock # 55024-96
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
National Instruments PXI-8464 Series Controller Area Network (CAN) Interfaces

Features
  • Philips SJA1000 CAN Controller and ISO 11898 Physical Layer
  • 100 Percent Bus Load Receiving Capability up to 1 Mbit/s
  • Hardware Timing for Accurate Timestamping and Synchronization
  • High-Speed, Low-Speed, or Single-Wire Transceiver Selected in Software

Description

The National Instruments PXI-8464 Series Controller Area Network (CAN) Interfaces are a 2-port transceiver-selectable controller area network (CAN) interface designed for communicating with high-speed, low-speed, or single-wire CAN devices. The appropriate transceiver for each port is selected in a configuration utility or in the application. NI CAN modules for PXI use the Philips SJA1000 CAN controller for advanced functionality such as listen-only, self-reception (echo), and advanced filtering modes and use new transceivers for sleep/wake-up mode. You can synchronize CAN, data acquisition (DAQ), vision, and motion modules using the PXI trigger bus. All National Instruments CAN interfaces are designed to meet the physical and electrical requirements for in-vehicle (automotive) networks based on CAN.

What are the differences between the Series 1 and Series 2 CAN boards?
Series 1 boards could communicate by either DeviceNet or CAN, but for Series 2 this functionality was separated into different products. Because of this, Series 1 cards require an older version of the NI-CAN driver to be used since Series 2 phased the Series 1 cards out.


Product Family: PXI-8464/2, PXI 8464/2, PXI8464/2


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

National Instruments PXI-8464 Series Controller Area Network (CAN) InterfacesNational Instruments PXI-8464 Series Controller Area Network (CAN) InterfacesNational Instruments PXI-8464 Series Controller Area Network (CAN) Interfaces
National Instruments PXI-8464 Series Controller Area Network (CAN) Interfaces


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 55024-96 - National Instruments PCMCIA-DNET PSH15-C6 Cable


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html