Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards
  • Abaco_Systems_SBS_Greenspring_SPI_200_View1_2019791620
  • Abaco_Systems_SBS_Greenspring_SPI_200_View2_2019791620
  • Abaco_Systems_SBS_Greenspring_SPI_200_View3_2019791620
  • Abaco_Systems_SBS_Greenspring_SPI_200_View4_2019791620

Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards



Part Number: 0390-1253A



Have a quote from somewhere else? Click Here
Stock # 55051-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards

Features
  • Supports (4) IndustryPacks
  • Ready Controlled Cycles for all IP Accesses
  • (4) 11 Bit Page Registers Allow Full 8 MB Memory Decoding for Each IP
  • (2) 16 Bit Control Registers

Description

The Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards is a four slot IndustryPack® carrier that uses a DSP-Link3 connection for communication with the host processor. It is a full size ISA card but all communication with the processor is done through the DSP-Link3 connector. It does not have any connections to the ISA bus except power and ground. The DSP-Link3 connection is made through a high density 64 pin ribbon cable. The SPI-200 adds a broad range of I/O and memory capabilities to DSP-Link3 processor systems and is appropriate for rugged industrial and commercial configurations.

Each IndustryPack slot may be individually configured for either 8 MHz or 32 MHz operation. The carrier supports four single-wide IPs, two double-wide or a combination. All accesses to the IndustryPacks use the upper 16 bits of the 32 bit DSP-Link3 data bus and use Ready-Controlled cycles. Each IndustryPack slot has a page register to allow the full 8 MB of memory space defined by the IndustryPack Module Specification. The page registers may be accessed by either Standard or Standard Fast ASTRB/ cycles.

The SPI-200 provides protected, filtered +5V, +12V, and -12V supplies to all the IndustryPack by means of passive "T" filters, capacitors and fuses. The three terminal filters provide excellent RF rejection of power supply conducted noise.


Product Family: SPI-200, SPI200, SPI_200


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor BoardsAbaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor BoardsAbaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards
Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 55051-1 - Abaco Systems / SBS / Greenspring SPI-200 Quad IP Carrier for DSP-Link3 Processor Boards


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html