Astronics / EADS / Racal Miscellaneous Parts
  • racal_option01_view1

Astronics / EADS / Racal Miscellaneous Parts

Features

  • Miscellaneous Parts
  • Wide Rage of Equipment

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



The smart card is addressed over the VXIbus, and all other modules resident in the VXIbus chassis are controlled by this card. Option 01 uses the local bus on the VXI P2 connector to provide scanning, delay and exclude capabilities. The built-in-test features in the smart card include confidence checking which monitors the state of each relay. It monitors a spare set of contacts or sensing coil current to ensure the switching system configuration is as programmed.

Racal Option 01 Smart Card Datasheet (pdf)
Racal Option 01 Smart Card Manual (pdf)

Part Number: 401901, 401901-005 , 411901-005, 404820



Stock # 55192-7




The smart card is addressed over the VXIbus, and all other modules resident in the VXIbus chassis are controlled by this card. Option 01 uses the local bus on the VXI P2 connector to provide scanning, delay and exclude capabilities. The built-in-test features in the smart card include confidence checking which monitors the state of each relay. It monitors a spare set of contacts or sensing coil current to ensure the switching system configuration is as programmed.

Racal Option 01 Smart Card Datasheet (pdf)
Racal Option 01 Smart Card Manual (pdf)

Part Number: 401901, 401901-005 , 411901-005



Stock # 55192-17




The Option 01T controls and receives all eight TTL trigger lines available on the VXIbus. It offers both message-based and register-based control in one module, combining ease-of-use with high-speed capability. The message-based interface accepts SCPI and IEEE-488.2 commands to communicate with all Racal Instruments VXIbus switch modules.

Racal Option 01T Switch Controller Card Datasheet (pdf)
Racal Option 01T Switch Controller Card Manual 1 (pdf)
Racal Option 01T Switch Controller Card Manual 2 (pdf)

Part Number: 405108, 405108-001, 407531-001, 415108



Stock # 55192-9




The Option 01T controls and receives all eight TTL trigger lines available on the VXIbus. It offers both message-based and register-based control in one module, combining ease-of-use with high-speed capability. The message-based interface accepts SCPI and IEEE-488.2 commands to communicate with all Racal Instruments VXIbus switch modules.

Racal Option 01T Switch Controller Card Datasheet (pdf)
Racal Option 01T Switch Controller Card Manual 1 (pdf)
Racal Option 01T Switch Controller Card Manual 2 (pdf)

Part Number: 405108-001



Stock # 55192-19




This board is used in many different EADS / Racal / DANA VXI cards (i.e. 3351, etc). It is not compatible with the 1260 series switch cards

Part Number: 405096, 405096-001B, 405096-001C



Stock # 61198-4




These interfaces are required to allow control by a module equipped with an Option 01 or Option 01T Smart Card. Revision F boards have the W22 jumper capability.

View Photo of the bottoms of these interfaces.

Part Number: 401951-003, 401951



Stock # 55192-13




There are 6 VXI single slot airflow directors in one package.

In order to improve the cooling of the used slots, in the Racal 1261A VXI Mainframe, a limited number of airflow directors may be installed at empty slot locations to redirect otherwise wasted airflow.



Stock # 55192-5


Stock # 55192-21




Accessories Inlcuded:
• P/N: 921316 Slide, Front Disconnect, 24inch
• P/N: 616260 Screw, PPH, SEMS, 8-32 x 0.375
• P/N: 456170-001 Ear, Rack Mounting, 2U, Left
• P/N: 456169-001 Ear, Rack Mounting, 2U, Right
• P/N: 921317 Backet Kit
• P/N: 610920 Nut, Retainer
• P/N: 615074 Screw, PPH, 8.32 x 0.375
• P/N: 615093 Screw, PPH, 10-32 x 0.750
• P/N: 615091 Screw, PPH, 10-32 x 0.500
• P/N: 456051 Plate, Retainer, Rear
• P/N: 321275 Handle, Rack Slide
• P/N: 615590 Screw, PFL, 10-32 x 0.500
• P/N: 456193 Washer, Flat 1.25OD x 0.1711.D x 0.100 THK
• P/N: 980746 Instruction Sheet




Stock # 55192-6




This unit's frame is dented and the rackmount is missing the door and has a dented handle.

Options:
• T330717-MTE-501

View Photo of the dented frame of the unit.

View Photo of the missing door on the rackmount.

View Photo of the dented handle on the rackmount.





Stock # 55192-18




This interface is a 68000-based daughter board that plugs into the prototyping board. It allows control of user circuitry via the 96 digital I/O lines or via the microprocessor's local bus (available only on the 7064M master version). The upper half of the 68000's address space is available for the user to interface with memory-mapped devices. The lower half is reserved for the 7064M's I/O ports, on-board memory, and VXIbus registers. All VXIbus registers are implemented including the VXIbus user-definable registers. The Message-based interface supports the local bus on the VXIbus backplane, which can either be used for proprietary signals or for expansion by adding up to eleven "slave" 7064M's.

Racal 7064M Datasheet (pdf)
Racal 7064M Manual (pdf)

Racal Part Number: F59440401-B




Stock # 55192-14




These interfaces are required to allow control by a module equipped with an Option 01 or Option 01T Smart Card. Revision C boards do not have the W22 jumper capability.

Part Number: 401951-003 Rev C and 401951 Rev C

View Photo of the bottoms of these interfaces



Stock # 55192-12



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

This page is a list of Racal miscellaneous parts spanning all categories.
Contact Us
Share:

Specifications

Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

Link to Astronics / EADS / Racal Website