Keysight / Agilent E3242A Charge/Voltage Breakout Box

Keysight / Agilent E3242A Charge/Voltage Breakout Box



This Agilent E3242A Charge/Voltage Breakout Box is new from Surplus Stock. Cables are not included.



Have a quote from somewhere else? Click Here
CE labeled RoHS Compliant
We typically stock RoHS compliant / CE marked equipment for this Keysight / Agilent E3242A.
Contact us for more information.
Stock # 55920-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Keysight / Agilent E3243A / E3242A Breakout Box

Features
  • Integrates 4 Channels of Signal Conditioning
  • Applications Include Both Acoustic and Mechanical Measurements
  • Two Input Connector Types Per Channel
  • Reduces the Count of Transducer Conditioning Equipment Needed for Both Small and Large Channel-Count VXI Systems

Description

Agilent E3243A
The Agilent E3243A Microphone/Voltage Breakout Box accessory is specifically designed to interface microphones (as well as voltage and 4 mA constant current power supply accelerometers) to Agilent’s high performance E1432A and E1433A VXI Digitizer modules. It integrates 4 channels of signal conditioning in one box, reducing the count of transducer conditioning equipment needed for both small and large channel-count VXI systems. Applications include both acoustic and mechanical measurements. It has two input connector types per channel to match the intended transducer connection, as well as buffered outputs via BNC connectors for signal monitoring or recording. The E3243A is dedicated for use with the E1432A and E1433A only and is designed for acoustic measurements by providing the conditioning necessary for pressure and free field microphones. It also provides conditioning for mechanical measurements where voltage or 4 mA constant current power supply accelerometers are to be used. Input connections for each channel are via BNC for voltage and 4 mA constant current power supply, and a 7-pin LEMO connector for microphones. The E3243A is remote programmable allowing you to set up each channel’s parameters through your application software. Each channel can be programmed for float or grounded input which connects the BNC shell to chassis ground, or allows for a differential input. Other programmable functions include gain setting and 4 mA constant current power supply on/off control.

Agilent E3242A
The Agilent E3242A charge/voltage breakout box is an accessory for the E1432A and E1433A VXI Modules. This Breakout Box provides both BNC and Microdot connection for each channel of the VXI module. Each breakout box has four BNC and four Microdot connectors for signal input. A 26-pin connector is provided for connection to the VXI module through an extension cable. Each channel has a program controlled float/ground switch to connect the input connector shell to the chassis ground, or to allow a floating input. The charge input has a charge amplifier with three gain settings, and a 2 kHz low-pass filter that can be switched in or out through software control. The BNC input is a direct connection to the VXI module with no amplification. The IEPE current source for powering accelerometer transducers can be switched on or off under program control. A light indicates when the current source is on.


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Agilent / HP / Keysight E3243A / E3242A Breakout BoxAgilent / HP / Keysight E3243A / E3242A Breakout Box
55920-10
Agilent / HP / Keysight E3243A / E3242A Breakout Box
55920-10


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 55920-2 - Keysight / Agilent E3242A Charge/Voltage Breakout Box


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html