Datel DVME-613A Isolated Industrial Product Data Channel VME A/D Board
  • Datel_DVME_613A_View1_2019127144547
  • Datel_DVME_613A_View2_2019127144547
  • Datel_DVME_613A_View3_2019127144547

Datel DVME-613A Isolated Industrial Product Data Channel VME A/D Board



Part Number: 17281 2B



Have a quote from somewhere else? Click Here
Stock # 56570-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Datel DVME-613 Isolated Industrial Product Data Channel VME A/D Board

Features
  • (16) Single-Ended or (8) Differential Analog Input Channels
  • 12, 14, or 16-Bit A/D Resolution
  • Isolation to ±500V
  • On-Board Programmable Gain Amplifier and Start Timer

Description

The Datel DVME-613 Isolated Industrial Product Data Channel VME A/D Board is a low-cost isolated analog input board for VME bus computers. The DVME-613 will accept sixteen single-ended or eight differential input channels which are all isolated from the VME bus by ±500 Volts. In addition, each channel is protected from adjacent channel overloads up to ±150 Volts. The common mode voltage range is ±11 Volts relative to isolated analog ground.

The analog input range is selectable as ±10 Volts for bipolar inputs or 0 to +10 Volts unipolar. By using an on-board programmable gain amplifier (PGA), inputs may be accepted directly from bridges, load cells, RTD's, and strain gauges. The PGA includes selectable gain ranges of times one, ten, and on hundred for low level inputs.

An optional signal conditioning pad area accepts shunt resistors, attenuators, hash filters, and clamps. This allows direct input from isolated 1-5 mA or 4-20 mA transmitters and from voltage sources greater than ±10 Volts full scale. For bridge-type sensors, on-board regulated DC excitation voltage is provided which is fully isolated from VME bus.

The DVME-613 inputs are plug compatible with DATEL's DVME-691 rack-mount signal conditioning panel for screw terminal inputs. Three A/D converter options are offered. The DVME-613A is a 12-bit A/D converter with overall accuracy of ±0.05% of full scale. Resolution of the DVME-613A is 2.5 millivolts per count for unipolar inputs.

The DVME-613B offers a 14-bit A/D converter and for highest resolution inputs, a 16-bit converter is included on the DVME-13C. All models produce left-justified data outputs so that boards may be interchanged without having to rewrite existing software to scale the data. A/D conversion takes 24 microseconds for the DVME-613A. The sampling A/D converter design offers continuous automatic calibration. To insure reliability in industrial process control environments, lcoal channels may be dedicated to ground and reference inputs for self-testing of signal paths.


Product Family: DVME-613, DVME613, DVME_613


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Datel DVME-613 Isolated Industrial Product Data Channel VME A/D BoardDatel DVME-613 Isolated Industrial Product Data Channel VME A/D BoardDatel DVME-613 Isolated Industrial Product Data Channel VME A/D Board


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Datel DVME-613 Datasheet (pdf) 
Link to Datel Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 56570-1 - Datel DVME-613A Isolated Industrial Product Data Channel VME A/D Board


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html