Teledyne / LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope

Teledyne / LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope



This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope is used and in excellent condition.

This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 3DE478-A0
• Installed Option Key: 9D8E-60C9-AEF7-18B1
• Options Enabled by this Key: MC01
Opt WP01: Advanced Waveform Math Package Installed
Opt WP02: Spectrum Analysis Package Installed
Opt WP03: Parameter Analysis Package Installed
Opt DDM: Disk Drive Measurements Installed
Opt CKIO: Clock In/Out Installed
Opt PRML: Supplementary Disk Drive Measurements Installed
Opt DDFA: Disk Drive Failure Analysis Installed
Opt MC01: Memory Card Reader and 512k SRAM Card Installed
Opt CPUP: PowerPC High Speed Processor Installed
Opt VGAC: VGA Output Port Installed
Opt GPIB: IEEE-488 I/O Control Bus Installed
Opt R232: Serial I/O Installed
Opt CLBZ: Piezo Buzzer Alarm Installed
Opt FD01: Floppy Drive Installed
Opt GP01: Internal Graphics Printer Installed
Opt CENT: Parallel Centronics Printer Port Installed
Opt CKTR: Clock Trigger Installed
Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max




Have a quote from somewhere else? Click Here
Stock # 59133-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Teledyne / LeCroy 4-Channel, 8 GS/s, 16-Bit, 1GHz Bandwidth Oscilloscope (with and without Jitter)

Features
  • 4 Channel, 1GHz Oscilloscope
  • 8 GS/s (combined), 2 GS/s (single) Max Sample Rates
  • Deep Memory / Max Record Lengths
  • Excellent Vertical Sensitivity: 2mV to 10V / Div
  • Extensive Built-in Disk Drive Analysis Functions
  • Eight Trigger Modes
  • Color CRT Display

Description

The Lecroy DDA-120 is a 4-Channel 1GHz bandwidth oscilloscope. The simultaneuous sampling rate maximum per channel with all four acquisitioning is 2GS/s. The maximum sampling rate with only one active channel is 8GS/s. Like most scopes, it is 8-bit, has external triggering capabilities, multiple triggering modes, holdoff, AC/DC/GND coupling, variable vertical sensitivity, and deep memory. Making this series of oscilloscopes unique, Lecroy added many utilities that are to optimize and automate the measurements made by disk drive manufacturers. This is what distinguishes the DDA (Disk Drive Analysis) series scopes from the others. If these special functions are inactive/unused, the scope functions like any other high-performance benchtop unit.

Product Family: DDA-120, DDA 120, DDA120


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Teledyne / LeCroy 4-Channel, 8 GS/s, 16-Bit, 1GHz Bandwidth Oscilloscope (with and without Jitter)Teledyne / LeCroy 4-Channel, 8 GS/s, 16-Bit, 1GHz Bandwidth Oscilloscope (with and without Jitter)Teledyne / LeCroy 4-Channel, 8 GS/s, 16-Bit, 1GHz Bandwidth Oscilloscope (with and without Jitter)
Teledyne / LeCroy 4-Channel, 8 GS/s, 16-Bit, 1GHz Bandwidth Oscilloscope (with and without Jitter)Teledyne / LeCroy 4-Channel, 8 GS/s, 16-Bit, 1GHz Bandwidth Oscilloscope (with and without Jitter)


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

LeCroy DDA-120 Datasheet (pdf) 
Link to Teledyne / LeCroy Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 59133-1 - Teledyne / LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html