Abaco Systems / VMIC VMIVME-4514-000 16-Channel Scanning Analog I/O Board

Abaco Systems / VMIC VMIVME-4514-000 16-Channel Scanning Analog I/O Board



VMIVME-4514-000

Filter: None

Part Numbers: 333-004514-000E, 332-004514-000K




Have a quote from somewhere else? Click Here
Stock # 59371-3
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / VMIC VMIVME-4514 / VMIVME-4514A 16-Channel Scanning Analog I/O Boards

Features
  • 16 Differential or Single-Ended Analog Input Channels
  • 16 Analog Output Channels with 10 mA Drive Capability
  • On-Board 12-Bit ADC and DAC
  • 40 kHz Maximum Throughput
  • Three A/D Operating Modes

Description

The VMIVME-4514A is a 16-Channel, 12-bit Analog Input/Output (AIO) Board. It provides both the stimulus and the response functions encountered in VME bus based closed-loop analog systems. The analog signals are available at the P2 backplane connector. It is self-contained, with a resident 12-bit Analog-to-Digital Converter (ADC) and a Digital-to-Analog Converter (DAC). The board also supports a Built-in-Test feature that checks all of the active components on the board. The VMIVME-4514A provides a single board solution to the analog input/output requirements of such VME bus applications as process control, simulators, trainers, and supervisory control.

The VMIVME-4514A provides the user with 16 analog outputs with 12 bits of resolution. The outputs are designed with individual Sample-and-Hold (S&H) amplifiers, one per channel. The outputs can be programmed (via on-board jumpers) to operate in a variety of voltage ranges. These ranges are 0 to +5 V, 0 to +10 V (unipolar), ±2.5, ±5.0, or ±10 V (bipolar). Each output can source or sink up to 10 mA at ±10 V. The outputs can be disconnected from the I/O connector for off-line testing.

The board also accepts 16 analog inputs. These inputs may be differential or pseudo-differential (single-ended). A 36 Hz single pole input filter may be ordered for the inputs. The input ADC can be programmed (via on-board jumpers) to operate in a variety of voltage ranges. These ranges are 0 to +5 V, 0 to +10 V (unipolar), ±2.5, ±5.0, or ±10 V (bipolar). The inputs have 12 bits of resolution. The inputs can be scanned by on-board multiplexers, and the data stored in a dual port memory.

The VMIVME-4514A has three ADC operating modes. They are Random Polling, Scanning Poll, and Auto Scanning. Auto Scanning Mode is entered when power is applied to the board, after a system reset, or under program control. In this mode, all 16 channels are continuously scanned. Their inputs are digitized and stored in sixteen 12-bit dual port registers. No programming is required other than reading the data from these registers.

Product Family: VMIVME-4514A, VMIVME 4514A, VMIVME4514A, VME-4514A, VME 4514A, VME4514A, VMIVME-4514, VMIVME 4514, VMIVME4514, VME-4514, VME 4514, VME4514


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / VMIC VMIVME-4514 / VMIVME-4514A 16-Channel Scanning Analog I/O Boards


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 59371-3 - Abaco Systems / VMIC VMIVME-4514-000 16-Channel Scanning Analog I/O Board


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html