National Instruments SC-2072 Termination Breadboard
  • National_Instruments_SC_2072_View1_2019928141823
  • National_Instruments_SC_2072_View2_2019928141823
  • National_Instruments_SC_2072_View3_2019928141823
  • National_Instruments_SC_2072_View4_2019928141823

National Instruments SC-2072 Termination Breadboard

The breadboard area is lightly used (end-user components installed on some of breadboard).

Part Number: 181310-02

The SC-2072 has screw terminals and a breadboard area that can be used for building custom analog, digital, and timing circuits.

Have a quote from somewhere else? Click Here
Stock # 60414-8
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
National Instruments SC-207x Series General Purpose Termination Breadboards

  • Eight Differential, 16 Single-Ended Channels
  • 36 Labeled Screw Terminals
  • Connects to the National Instruments DAQ Boards


The SC-207X Series boards are general-purpose termination breadboards. These breadboards connect to the National Instruments multifunction data acquisition (DAQ) boards for the IBM PC/XT/AT, Personal System/2, and compatible computers, and Macintosh II computers.

SC-2070 and SC-2071
The SC-2070 and SC-2071 boards are two general-purpose breadboards with signal-labeled screw terminals and temperature sensor, breadboard, and analog signal conditioning areas. The SC-2070 and SC-2071 boards can be used for analog signal conditioning on the Macintosh, IBM PS/2 Micro Channel, and IBM PC/XT/AT computers. The SC-2070 and SC-2071 breadboards simplify the connection of analog and digital signals to the DAQ board in laboratory, test, and production environments. Up to seven thermocouples can be connected to each SC-2070 or SC-2071 board while using one channel to monitor the onboard temperature sensor for cold-junction compensation. The temperature sensor can be disconnected to make all eight differential or 16 single-ended analog input channels available on the board. The boards have silkscreened component locations for resistors and capacitors for building single-pole highpass and lowpass filters, voltage dividers, and broken thermocouple detectors. The SC-2070 and SC-2071 boards also have a general-purpose breadboard area for building custom analog, digital, and timing circuits.

The SC-2072 board is a general-purpose breadboard with screw terminals and a breadboard area that can be used for building custom analog, digital, and timing circuits. The SC-2072 can be used with all National Instruments NB Series, MC Series, PC Series, AT Series, Lab/1200 Series, and the PC-OPDIO-16 DAQ, digital I/O, and timing boards (except the NB-A2000 and the EISA-A2000), and some DAQCards.

Product Family: SC-207x, SC207x, SC 207x, SC-2071, SC 2071, SC2071, SC-2072, SC 2072, SC2072, SC-2073, SC 2073, SC2073

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Analog Input
Number of Channels8 Differential, 16 Open-Ended
Field Connections36 Labeled Screw Terminals
Conditioning Capability7 Open Component Positions
Breadboarding Area
SC-2070, SC-207110.2 cm X 3.8 cm (4.0 in X 1.5 in)
SC-207210.9 cm X 7.6 cm (4.3 in X 3.0 in)
Dimensions20.1 cm X 12.5 cm X 4.6 cm (7.9 in X 4.9 in X 1.8 in)
Signal Connections54 Screw Terminals
I/O ConnectorOne 50-Pin Male Ribbon Cable Connector

Contact Us

Item Images

Click a thumbnail to view larger image:

National Instruments SC-207x Series General Purpose Termination Breadboards
National Instruments SC-207x Series General Purpose Termination Breadboards

Contact Us
Manuals, Datasheets, Drivers, Links

National Instruments SC-207x Series Manual (pdf) 
Link to National Instruments Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 60414-8 - National Instruments SC-2072 Termination Breadboard

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)