Ametek / VTI Instruments / VXI Technology SM6001 10 (4x1) Coaxial Tree Module
  • VXITechnology_SM6001_View1
  • VXITechnology_SM6001_View2
  • VXITechnology_SM6001_View3

Ametek / VTI Instruments / VXI Technology SM6001 10 (4x1) Coaxial Tree Module

The SM6001 high-density 4x1 coaxial tree is designed for general purpose RF switching. The front panel contains two high-density, 26-pin connectors. Excellent crosstalk and isolation is maintained by using RF relays with bandwidths in excess of 1.5GHz, along with short low loss coaxial runs from the connector directly to the relays. This module is also configured to avoid any unterminated stub effects.

Part Number: 52-0123-000

Have a quote from somewhere else? Click Here
Stock # 60435-40
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Ametek / VTI Instruments / VXI Technology SMIP Series Modular Signal Switching Systems

  • Offers DC to RF Signal Switching
  • Modular Building Blocks in Each Frequency Range
  • Extensive Non-Volatile Memory
  • Designed to Offer the Switching Features of VXI Message-Based Systems
  • Built-in Scan Lists with 1 MB Deep Pattern Memory


The Ametek / VTI Instruments / VXI Technology SMIP (Switch Modularity and Interface Platform) is designed with density and cost in mind. As opposed to "traditional" VXIbus switching solutions, the SMIP family consists of switch modules that can be mixed and combined to form flexible high-density switch configurations.

All SMIP module designs are optimized to preserve signal integrity. All switch modules employ multi-layer PCB designs with extensive ground planes and shielding where appropriate. The relays are selected to maximize signal integrity. All signal ground planes are also isolated from the control circuit grounds, and the signal paths are designed to minimize crosstalk between channels. To further minimize digital noise, the control circuitry goes into a quiescent state when not processing commands. This allows for the switching of low-level signals.

The SMIP interface supports direct register control of all relays, the ability to download scan lists with backplane trigger advance, and hardware implemented break-before-make and make-before-break switching. By using direct register access, switching speeds are maximized while keeping VXIbus backplane traffic to a minimum. By using the trigger feature, large switching systems across multiple mainframes can be controlled with a single command.

Product Family: SM1000, SM1000A, SM1000B, SM2001, SM2001A, SM2002, SM2003, SM2004, SM2005, SM2008, SM2009, SM3001, SM3001DR, SM4001, SM5001, SM5002, SM5003, SM5004, SM5005, SM6001, SM6002, SM6004, SM6005, SM7000, SM7270, SM7272, SM7274, SM7275, SM7276, SM7001A, SM7374, SM7474, SM7574, SM8000, SM8001, SM8002, SM8003, SM4004

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Ametek / VTI Instruments / VXI Technology SMIP Series Modular Signal Switching Systems

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 60435-40 - Ametek / VTI Instruments / VXI Technology SM6001 10 (4x1) Coaxial Tree Module

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)