Pentek MIX Modules and Baseboards
  • pentek_4343_view1

Pentek MIX Modules and Baseboards

Features

  • Modular Interface Extension
  • 32-Bit Bus Technology for VMEbus Systems
  • Address Capability of 4 GB

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This Pentek 4200/01 MIX Baseboard is used and in excellent condition. This unit includes the 4201 Mezzanine Board and Front Panel Board.

Part Number: 32042000G

Configuration:
• Option 004 - 4 MB SRAM
• (2) Front Panel Serial Ports

Mezzanine Part Numbers: 3142006F, 3142008F



Stock # 61502-16




This Pentek 4200/01 MIX Baseboard is used and in excellent condition. This unit includes the 4201 Mezzanine Board and Front Panel Board.

Part Number: 432011C

Configuration:
• Option 002 - 2 MB SRAM
• (2) Front Panel Serial Ports

Mezzanine Part Number: 562005B



Stock # 61502-39




This Pentek 4201 MIX Baseboard is used and in excellent condition. This unit includes the 4201 Mezzanine Board and Front Panel Board.

Part Number: 900010G

Configuration:
• 40 MHz 68EC030 Processor
• (2) Front Panel Serial Ports

Mezzanine Board Part Number: 1971016B




Stock # 61502-9




This Pentek 4201A MIX Baseboard is used and in excellent condition. This unit includes the 4201 Mezzanine Board and Front Panel Board.

Part Number: 797017G

Configuration:
• Option 004 - 4 MB SRAM
• 40 MHz 68EC030 Processor
• (2) Front Panel Serial Ports

Mezzanine Board Part Number: 562001B




Stock # 61502-15




This Pentek 4241 Parallel I/O MIX Module is used and in excellent condition.

Using a full 32-bit parallel data word for both input and output, Model 4241 Digital I/O MIX Module serves as a slave device to transfer digital data from its front panel connectors to one or more subsystem processors via the MIX bus. Although often combined with other MIX modules, up to three digital I/O modules may be used in a subsystem for applications such as decimating filters or data reduction, where the output of one I/O feeds the input of another.



Stock # 61502-8




This Pentek 4241 Parallel Digital I/O MIX Module and MIX Baseboard is used and in excellent condition. This unit has a 4202 MIX Baseboard Module to operate as a slave VMEbus board.

Using a full 32-bit parallel data word for both input and output, Model 4241 Digital I/O MIX Module serves as a slave device to transfer digital data from its front panel connectors to one or more subsystem processors via the MIX bus. Although often combined with other MIX modules, up to three digital I/O modules may be used in a subsystem for applications such as decimating filters or data reduction, where the output of one I/O feeds the input of another.

Part Number: 528011C
Expansion Module Part Number: 3695005E (Option 002, 16 Ksample FIFO)



Stock # 61502-5




This Pentek 4243 A/D - D/A Converter Mix Module is used and in excellent condition. This unit is missing the ejector handles.

The Model 4243 is a dual-channel, 18-bit A/D and D/A converter MIX module with input and output low pass filters. These modules provide a complete interface between the analog world and digital signal processing.

Part Number: 518001E, 412014, 004-42420
Daughter Card Part Number: 518012D, 412029, (Option 003, 16 Ksample FIFO)



Stock # 61502-26




This Pentek 4243 A/D - D/A Converter Mix Module and MIX Baseboard is used and in excellent condition. This unit has a 4202 MIX Baseboard Module to operate as a slave VMEbus board.

Model 4243 is a dual-channel, 18-bit A/D and D/A converter MIX module with input and output low pass filters. These modules provide a complete interface between the analog world and digital signal processing.

Part Number: 2225003G, 320-42020
Daughtercard Part Number: 2471002F, 004-42420 (Option 003, 16 Ksample FIFO)



Stock # 61502-6




This Pentek 4244 Signal Processor MIX Module is used and in excellent condition.

Options Installed:
• 400

Configuration:
• 8 MB DRAM



Stock # 61502-23




This Pentek 4246 12-Bit 10 MHz A/D Converter MIX Module is used and in excellent condition.

The Pentek 4246 12-Bit 10 MHz A/D Converter provides the link between the signal and the DSP processor. The 12-bit A/D maintains signal purity at 10 MHz maximum sampling rate. Two high-speed swinging buffers are programmable from 2k to 32k sample contiguous block lengths, providing a flexible interface to the MIX bus.

Part Number: 004-43610



Stock # 61502-3




This Pentek 4248 32-Channel 12-Bit A/D Converter is used and in excellent condition.

Configuration:
• Option 01: ±10V Full Scale Voltage

The Pentek Model 4248 is a data acquisition expansion module for the Pentek series of VME/ MIX Baseboards. It provides up to 32 channels of A/D conversion to 12-bit accuracy (optionally 14 bits) with a total maximum conversion time of less than 10 µsec. The inputs are connected to 32 sample-and-hold amplifiers for simultaneous sampling, making this device the ideal choice for multi-channel applications in which phase relationships between channels must be maintained.

Part Number: 004-42480, 533003F,
Mezzanine Card Number: 004-42481, 533011C, 541010C



Stock # 61502-14




This Pentek 4251 Triple DSP32C Coprocessor Module is used and in excellent condition.

Configuration:
• (3) Front Panel Serial Ports



Stock # 61502-19




This Pentek Model 4252 16 Channel 16-bit 50 kHz A/D and D/A Converter MIX Module is used and in excellent condition. Ejector handles not installed.

The Pentek Model 4252 16 Channel 16-bit 50 kHz A/D and D/A Converter is specifically designed for digital audio use, providing sixteen individual analog inputs and outputs with 16-bit resolution. It has an 80 dB dynamic range with simultaneous sampling from 4-50 kHz. It also has a programmable sampling rate, input gain, and output attenuation.



Stock # 61502-2




This Pentek Model 4252 16 Channel 16-bit 50 kHz A/D and D/A Converter MIX Module is used and in excellent condition.

The Pentek Model 4252 16 Channel 16-bit 50 kHz A/D and D/A Converter is specifically designed for digital audio use, providing sixteen individual analog inputs and outputs with 16-bit resolution. It has an 80 dB dynamic range with simultaneous sampling from 4-50 kHz. It also has a programmable sampling rate, input gain, and output attenuation.



Stock # 61502-17




This Pentek 4260 Wide/Fast SCSI-2 Controller MIX Module is used and in excellent condition.

Part Number: 004-42600, 320-426000, 2494007A

Configuration:
• Option 003 - 68-Pin High Density SCSI Connector, Single-Ended, 16-Bit

Daughtercard Part Numbers: 320-42601, 2494015A



Stock # 61502-32




This Pentek 4270 Quad TMS320C40 Processor VME Board / MIX Module is used and in excellent condition.

Part Number: 4270-015

Installed Options:

• Option 015: (4) 50 MHz Clock

4270-015 Configuration:
• 50 MHz TMS320C40 Processor
• 4 x 1 MB Local SRAM
• 4 x 1 MB Global SRAM




Stock # 67004-1




This Pentek 4271 Digital Receiver MIX Module is used and in excellent condition. This unit does not have the MIX Baseboard Module attached to make it operate as a slave VMEbus board.

Part Number: 320-42711

The Pentek Model 4271 Digital Receiver MIX Module is a general purpose digital receiver/tunable bandpass filter MIX module for VMEbus workstations and embedded systems. It accepts 12-bit data at sampling rates up to 70 MHz on 1 to 4 channels. Narrowband data is extracted from the wideband input by digital down conversion to a lowpass band. The low pass signal is then filtered and decimated.




Stock # 61502-27




This Pentek 4271 Digital Receiver MIX Module is used and in excellent condition. This unit has the MIX Baseboard Module attached to make it operate as a slave VMEbus board.

Part Number: 320-42000

The Pentek Model 4271 Digital Receiver MIX Module is a general purpose digital receiver/tunable bandpass filter MIX module for VMEbus workstations and embedded systems. It accepts 12-bit data at sampling rates up to 70 MHz on 1 to 4 channels. Narrowband data is extracted from the wideband input by digital down conversion to a lowpass band. The low pass signal is then filtered and decimated.




Stock # 61502-18




This Pentek 4272 Multiband Digital Reciever MIX Module is used and in excellent condition.

Model 4272 is a general purpose multiband digital receiver MIX module which accepts digitized data at sampling rates up to 70 MHz. It contains one wideband and two narrowband receivers, which perform frequency down conversion, lowpass filtering, and decimation of the sampled output. The receiver output signals can be delivered through the MIX bus to one of Pentek’s VMEbus MIX baseboards, thereby providing DSP functions and/or DMA transfers to the VMEbus. A front panel digital output of the wideband receiver allows data to be sent to a DSP subsystem over a dedicated parallel cable.

Part Number: 2716012C
Daughtercard Part Number: 27160101 (Option 012, 12-Bit ECL Diff. Inputs)



Stock # 61502-10




This Pentek 4275 32-Channel 16-Bit 100 kHz A/D Converter MIX Module is used and in excellent condition.

Part Number: 004-42754, PC.2488011B

Configuration:
• Option 007 - Differential Inputs
• Option 008 - ±10.0 V Full Scale Input Voltage Range

Daughtercard Part Numbers: PC.2488023A



Stock # 61502-33




This Pentek 4283 Floating Point DSP MIX Module is used and in excellent condition.

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8MBytes of dual-ported DRAM, 256 kBytes of high-speed SRAM, and 128 kByte of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Part Number: 332017
Daughtercard Part Number: 363005 (Option 002, 4 MBytes Dual-Port DRAM)



Stock # 61502-4




This Pentek 4283 Floating Point DSP MIX Module is used and in excellent condition. This module does not have the MIX connector attached to it.

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8MBytes of dual-ported DRAM, 256 kBytes of high-speed SRAM, and 128 kByte of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Part Number: 332017
Daughtercard Part Number: 386026 (Option 002, 4 MBytes Dual-Port DRAM)



Stock # 61502-30




This Pentek 4283 Floating Point DSP MIX Module is used and in excellent condition.

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8MBytes of dual-ported DRAM, 256 kBytes of high-speed SRAM, and 128 kByte of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Part Number: 332017
Daughtercard Part Number: 2284006
Option 002: 4 MBytes Dual-Port DRAM
Unit is also labeled as having Option 063.



Stock # 61502-13




This Pentek 4284 Single TMS320C40 Processor MIX Baseboard is used and in excellent condition.

Options:
• Option 005: 2 MB Local SRAM
• Option 006: 2 MB Global SRAM
• Option 015: 50 MHz Clock

The Pentek 4284 is a powerful platform on which to configure a custom VMEbus MIX subsystem. It incorporates TI's TMS320C40 which acts as a controller and performs high-speed signal processing. Although the Model 4284 has enough power to operate standalone in many applications, its speed and flexibility are enhanced by adding MIX modules.

Product Family: 5895-01-480-4908 5895014804908




Stock # 61502-31




This Pentek 4284 Single TMS320C40 Processor MIX Baseboard is used and in excellent condition. This module does not have the MIX connector attached to it.

Options:
• Option 005: 2 MB Local SRAM
• Option 006: 2 MB Global SRAM
• Option 015: 50 MHz Clock

The Pentek 4284 is a powerful platform on which to configure a custom VMEbus MIX subsystem. It incorporates TI's TMS320C40 which acts as a controller and performs high-speed signal processing. Although the Model 4284 has enough power to operate standalone in many applications, its speed and flexibility are enhanced by adding MIX modules.

Product Family: 5895-01-480-4908 5895014804908




Stock # 61502-35




These Pentek 4343 A/D - D/A Converter MIX Modules and MIX Baseboard are used and in excellent condition.

(3) Pentek MIX 4343 A/D - D/A Converter Modules Installed

• 2-Channel Modules
• DC - 192 kHz

(1) VMEbus Baseboard

• Intel 486 Processor Installed
• Extended Physical Length



Stock # 61502-1




This Pentek MIX Stacking Connector is used and in excellent condition.

Part Number: 3884-000A



Stock # 61502-7




This Pentek MIX Stacking Connector is new from surplus stock. It includes four MIX jackscrews.

Part Numbers: 351-13000, 3884-000A



Stock # 61502-20




This Pentek MIX Stacking Connector is new from surplus stock. This unit includes four MIX jackscrews.

Part Number: 3882-100A



Stock # 61502-25




This Pentek MIX Spacer Board is used and in excellent condition.

Part Number: 320-42833



Stock # 61502-24




This Pentek MIX Spacer Board is new from surplus stock.

Part Number: 320-42833



Stock # 61502-21




This Pentek MIX Stiffener is new from surplus stock. It includes four flathead screws.



Stock # 61502-22




This Pentek 4283 Floating Point DSP MIX Module is used and in excellent condition.

The Pentek 4283 Floating Point DSP MIX Module for VMEbus is based on the Texas Instruments TMS320C30 Floating Point Digital Signal Processor. It features the 32 MFlop TMS320C30 DSP chip, up to 8MBytes of dual-ported DRAM, 256 kBytes of high-speed SRAM, and 128 kByte of EPROM. Since the Model 4283 may function as a VMEbus master and/or system controller, the TMS320C30 may access VMEbus resources simply by reading or writing to certain portions of its memory map. When installed in Slot 1, the Model 4283 can drive the system clock and reset signals and function as the bus arbiter.

Part Number: 332017
Daughtercard Part Number: 468009 (1 MByte Dual-Port DRAM)



Stock # 61502-12




This Pentek 4284 Single TMS320C40 Processor MIX Baseboard is used and in excellent condition.

Configurations:
• 4 MB DRAM
• 1 MB Local SRAM
• 1 MB Global SRAM
• 40 MHz Clock

The Pentek 4284 is a powerful platform on which to configure a custom VMEbus MIX subsystem. It incorporates TI's TMS320C40 which acts as a controller and performs high-speed signal processing. Although the Model 4284 has enough power to operate standalone in many applications, its speed and flexibility are enhanced by adding MIX modules.

Product Family: 5895-01-480-4908 5895014804908




Stock # 61502-34




This Pentek 4284 Single TMS320C40 Processor MIX Baseboard is used and in excellent condition.

Options:

• Option 003: 512 kB Flash Memory
• Option 015: 50 MHz Clock

The Pentek 4284 is a powerful platform on which to configure a custom VMEbus MIX subsystem. It incorporates TI’s TMS320C40 which acts as a controller and performs high-speed signal processing. Although the Model 4284 has enough power to operate standalone in many applications, its speed and flexibility are enhanced by adding MIX modules.

The C40 of the 4284 serves as a 50 MFLOPS DSP, as well as a complete DMA controller running concurrently with the CPU.



Stock # 61502-28




This Pentek 4284 Single TMS320C40 Processor MIX Baseboard is new from surplus stock.

Options:

• Option 002: 128 kB Flash EEPROM
• Option 015: 50 MHz Clock

The Pentek 4284 is a powerful platform on which to configure a custom VMEbus MIX subsystem. It incorporates TI’s TMS320C40 which acts as a controller and performs high-speed signal processing. Although the Model 4284 has enough power to operate standalone in many applications, its speed and flexibility are enhanced by adding MIX modules.

The C40 of the 4284 serves as a 50 MFLOPS DSP, as well as a complete DMA controller running concurrently with the CPU.



Stock # 61502-11



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

This unit uses Intel's Modular Interface eXtension (MIX) technology to combine a Pentek MIX baseboard with three Pentek 4343 expansion modules, creating a triple-slot unit for 32-bit VMEbus systems. The MIX bus is a high performance stacking and communications interface to connect expansion modules to a VMEbus baseboard. Pentek and other manufacturers adopted this bus because of its speed, reliability and flexibility. This private bus allows not only for high-speed data transfers between modules, but also for extremely compact and reliable subsystem design. The Pentek model 4343 expansion module is a 2-channel A/D - D/A converter with DC - 192 kHz TTL levels.

Product Family: 4343, 4242, 4243, 42, 43, 4246, 42-46, 42 46, 4 2 4 6, 43-43, 4 3 4 3, 4 2 4 2, 4252, 42-52, 42 52, 4 2 5 2, 4248
Contact Us
Share:

Specifications

Channels4246: 1
4252: 16
Sampling Rate4246: 10 MHz
Bits4246: 12
4252: 16
Amp Type4246: Single-ended, Input or Output
Input Imp.4246: 50
4252: 100 kOhm
F.S. Volts4246: ± 1 V
Max Memory4246: 64 k