Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module
  • Abaco_Systems_SBS_Greenspring_IP_MP_Serial_View1_20175189123
  • Abaco_Systems_SBS_Greenspring_IP_MP_Serial_View2_20175189123

Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module



The IP-MP Serial IndustryPack specifications can be seen here.

Part Number: 0340-1142 C, 0340-1142 B2

Product Family: 5895-01-523-8434 5895015238434




Have a quote from somewhere else? Click Here
Stock # 61832-5
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module

Features
  • FIFOs on All Receivers and Transmitters
  • Multi-Protocol Support
  • Data Rates up to 10 Mb/s Synchronous with External Clock
  • DMA and 32 MHz Operation Supported

Description

The Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module is an IndustryPack module that implements two EIA-232/422/485 high-speed multi-protocol serial ports, each with a full set of handshake and clock signals. Protocols include SDLC, HDLC, bisynchronous, NRZ, NRZI, and Biphase. IP-MP-Serial incorporates the Zilog Z16C30 Universal Multi-Protocol Serial Controller (USC) that includes four 32-byte FIFO buffers. The two channels within the USC are completely independent. Each channel has a baud rate generator, a digital phase-locked loop, a vector register, an interrupt controller, and a protocol controller. Additional capabilities include 16- and 32-bit CRC generation and checking, one to eight bits per character, one address/data bit, MIL-STD-1553B protocol support, sync stripping, preamble generation, and digital phase-locked loop circuits for clock recovery.

IP-MP-Serial includes an on-board 3.6864 MHz oscillator to provide all of the standard baud rates. A separate location is provided on the IndustryPack for a user-supplied oscillator to allow non-standard baud rates. The I/O interface provides four external clock lines to permit full-duplex synchronous operation on both channels. Each channel's interface includes an external transmit and a receive clock. The transmit clock can be programmed to be either an input to the IndustryPack or an output from the IndustryPack. The receive clock is an input only.


Product Family: IP-MP-Serial, IP-MP Serial


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack ModuleAbaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 61832-5 - Abaco Systems / SBS / Greenspring IP-MP-Serial Dual EIA-232/422/485 High-Speed Multi-Protocol Serial Port IndustryPack Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html