Keysight / Agilent 6627A Multiple Output Linear DC Power Supply
  • Keysight_Agilent_6627A_View1_2018712103549
  • Keysight_Agilent_6627A_View2_2018712103549
  • Keysight_Agilent_6627A_View3_2018712103549
  • Keysight_Agilent_6627A_View4_2018712103549

Keysight / Agilent 6627A Multiple Output Linear DC Power Supply



This Agilent / HP 6627A Multiple Output Linear DC Power Supply is missing the two side handles; however, this will not prevent it from functioning properly.

Installed Options:
• 750: Fault (FLT) Remote Inhibit (INH) and Relay Control

Total Outputs: 4
Output 1: 0-20V/0-2A or 0-50V/0-0.8A
Output 2: 0-20V/0-2A or 0-50V/0-0.8A
Output 3: 0-20V/0-2A or 0-50V/0-0.8A
Output 4: 0-20V/0-2A or 0-50V/0-0.8A




Have a quote from somewhere else? Click Here
CE labeled RoHS Compliant
We typically stock RoHS compliant / CE marked equipment for this Keysight / Agilent 6627A.
Contact us for more information.
Stock # 61925-4
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Keysight / Agilent 6627A Multiple Output Linear DC Power Supply

Features
  • Up to Four Fully Isolated Power Supplies in a 3 U Package
  • Dual-Range Outputs
  • Fast, Low-Noise Outputs
  • Built-In Measurements and Advanced Programmable Features
  • Protection Features to Ensure DUT Safety

Description

The Agilent / HP 6627A Multiple Output Linear Power Supply features a combination of programming capabilities and linear power supply performance that make systems applications. The 6627A output combination allows 4 channels with up to 40 W of power. This flexibility allows you to use the same output to power loads with different voltage and current requirements. No separate command is required to program ranges; the power supply automatically selects one of the operating ranges based on the last parameter (voltage or current) that is set. Additionally, each output contains an active downprogrammer, which means that voltage downprogramming can be accomplished as quickly as upprogramming, even without a load.

The output voltage and current for any output can be monitored with the front panel display. Output specific error messages are also displayed. Front panel annunciators show the operating status of the instrument. The front panel keypad lets you set and readback the voltage limit, current limit, and overvoltage trip level of any output. With the keypad, you can also enable or disable outputs, mask and delay bits in the fault register, enable overcurrent protection, reset overvoltage and overcurrent protection, and return to local operating mode.


Product Family: 6627A, 6627-A, 6627 A


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Agilent / HP 6627A Multiple Output Linear DC Power SupplyAgilent / HP 6627A Multiple Output Linear DC Power SupplyAgilent / HP 6627A Multiple Output Linear DC Power Supply
Agilent / HP 6627A Multiple Output Linear DC Power Supply


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 61925-4 - Keysight / Agilent 6627A Multiple Output Linear DC Power Supply


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html