DynamicSignals / Kinetic Systems 4054 Recording Datalogger CAMAC Module

DynamicSignals / Kinetic Systems 4054 Recording Datalogger CAMAC Module



This Kinetic Systems 4054 Recording Datalogger CAMAC Module is used and in excellent condition.

Model: 4054-Z1A, Transient Memory, One Megasample x 12-Bitcapacity




Have a quote from somewhere else? Click Here
Stock # 62963-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
DynamicSignals / Kinetic Systems 4054 Recording Datalogger CAMAC Module

Features
  • 32 Input Channels
  • Twelve-Bit Resolution
  • Expandable to 64 Channels
  • Programmable Active Channels
  • Memory Readout At Full Dataway Speed

Description

The 4054 is a high-capacity memory module with memory size options of one, two, or four megasamples. Up to four 4054s can be connected to one datalogging recorder, giving a total memory capacity of sixteen megasamples. When more than one 4054 module is used, each must have four megasample capacity. The available memory per channel is the total memory divided by the number of active channels. For smaller memory requirements, a 4050 memory module may be substituted for the 4054. However, 4050 and 4054 modules may not be used together in a system.

The input signal for all channels is received on two 34-contact ribbon connectors. Sample rate is controlled by a programmable internal clock that is selectable from 0.1 hertz to 5 kilohertz or by an external TTL-level clock. A clock-out signal is provided for driving another recording datalogger.

The samples for each channel can be read out contiguously by an F(2)•A(0)command [preceded by an F(17)•A(0) channel command]. The readout can also occur in a streaming fashion (channel data interleaved) by using the F(2)•A(1)command. Both single-channel and streaming readout can be at full Dataway speed.

As an aid in system setup, the ADC can be read directly: “present value monitoring” Read commands are included. Each 4024 contains a 32-word memory, readable from the Dataway with an F(1)•A(0) for single-channel or an F(1)•A(1) for reading all 32 channels. The F(17)•A(1) command is used to select the starting channel (1-32). This feature is also useful for applications where a 4054 memory module is not needed. The 4024 can then sample 4, 8, 16, or 32 channels once, and store the conversions in the 32-word memory.


Product Family: 4054, 40-54, 40 54, 4 0 5 4


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Kinetic Systems 4054 Recording Datalogger CAMAC Module


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 62963-1 - DynamicSignals / Kinetic Systems 4054 Recording Datalogger CAMAC Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html