Fluke / Wavetek 1361 4.5 to 6.5 Digit Multimeter

Fluke / Wavetek 1361 4.5 to 6.5 Digit Multimeter



This Fluke / Wavetek 1361 4.5 to 6.5 Digit Multimeter is used and in excellent condition.

Product Family: 6625-01-495-9291 6625014959291




Have a quote from somewhere else? Click Here
Stock # 63842-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Fluke / Wavetek 1361 4.5 to 6.5 Digit Multimeter VXI Modules

Features
  • 4.5 to 6.5 Digit Resolution
  • DCV, ACV and Resistance Functions
  • 1000 Readings/Second
  • SCPI Compatible Command Language
  • Backplane Trigger with Trigger Delay

Description

Model 1361 is a message based, single width, C size card DMM conforming to the VXI specification 1.4. It provides DCV, ACV measurement capability to lOOOVrms and ohms with programmable resolutions between 4 1/2 and 6 1/2 digits and read rates up to 1000 per second. At high read rates where the system controller may limit the speed of continuous operation, an internal data store can be set to record a block of between 1 and 1000 readings. Additional options provide DCI and ACI functions to 2 amperes. Dual triggering is provided, using either an internal system trigger or an external TTL level through the use of the VXI backplane connectors.

To provide a totally floating input channel, it is essential to isolate the input buffer from the backplane power supplies. A unique low level DC to DC converter design achieves this, which coupled with the benefits of careful internal guarding, has produced extremely high isolation resulting in a common mode rejection ratio (CMRR) of > 146 dB, outperforming most conventional designs.

Switchable active filters together with a range of digital filtering > 20 dB of normal mode rejection (NMR) to line frequency interference. An additional > 54 dB is provided by programming the timing circuits of the 1361 to match either a 50 Hz, 60 Hz or 400 Hz environment


Product Family: 1361, 1361 DMM


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Form Factor Module(VXI)
Number of Digits (Max) 6.5 digits
DC Volts Minimum Range 100 mV
DC Volts Maximum Range 1000 V
DC Volts No. of Ranges 5
DC Volts Range Steps 1/10/100
DC Volts Maximum Reading Rate 1000 pt/sec
AC Volts Minimum Range 100 mV
AC Volts Maximum Range 1000 V
AC Volts No. of Ranges 5
AC Volts Range Steps 1/10/100
AC Volts Minimum Frequency 10 Hz
AC Volts Maximum Frequency 1 MHz
AC Volts Maximum Reading Rate 1000 pt/sec
Normal Mode Rejection Ratio 54 dB
Resistance Minimum Range 100 Ohm
Resistance Maximum Range 10 MOhm
Resistance No. of Ranges 5
Resistance Range Steps 1/10/100
Resistance Maximum Reading Rate 1000 pt/sec


Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Fluke / Wavetek 1361 4.5 to 6.5 Digit Multimeter VXI Modules


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Wavetek 1361 Datasheet (pdf) 
Link to Fluke / Wavetek Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 63842-2 - Fluke / Wavetek 1361 4.5 to 6.5 Digit Multimeter


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html