National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module
  • ni_fp_1600_view1

National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module

Features

  • Auto Negotiating 10/100 Ethernet Network Interface
  • Built-in High Efficiency Power Supply Powers I/O modules
  • Network Watchdog Timer
  • Snap Shot Capability and Programmable Power-Up State
  • Connects to an Ethernet Network Using the TCP/IP Protocol
  • Supports Up to Nine I/O Modules

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module is used and in excellent condition.

Part Numbers: 185690A-01, 185690C-01, 185690D-01, 185690E-01, 187684D-01



Stock # 64661-2




This National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module is new from surplus stock.

Part Number: 185690E-01




Stock # 64661-1




This National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module is used and in good condition. There is a small chip on the side of this unit; however, this does not affect functionality.

View Photo of chip.

Part Number: 185690A-01




Stock # 64661-3




This National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module is used and in good condition. This unit has two holes in the plastic case; however, this does not affect functionality.

View Photo of hole.
View Photo of second hole.

Part Number: 185690A-01



Stock # 64661-4



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The National Instruments FP-1600 FieldPoint 10/100 Ethernet Network Module connects a 10/100 Ethernet network to FieldPoint I/O modules. Because the FP-1600 is an Ethernet device, the maximum number of FP-1600 network modules that can be installed on your Ethernet network is determined by your network topology. Each FP-1600 can support up to nine I/O modules. A FieldPoint system consists of at least one network module, at least one terminal base, and one or more I/O modules.

The FP-1600 network module connects directly to a 10 Mbps or 100 Mbps Ethernet network. The FP-1600 auto detects the speed of the connection and configures itself accordingly.

Product Family: FP-1600, FP 1600, FP1600
Contact Us
Share:

Specifications

Network interface10BaseT and 100BaseTX Ethernet
Compatibility IEEE802.3
Communication rates 10 Mbps, 100 Mbps, auto negotiated
Cabling distance100 m
Power supply range11 to 30 VDC
Power consumption7 watts (I/O Module Consumption)
Maximum terminal bases per bank 9
Maximum number of banksDetermined by network topology