Ametek / VTI Instruments / VXI Technology VT1563A 2-Channel Digitizer

Ametek / VTI Instruments / VXI Technology VT1563A 2-Channel Digitizer

This unit does not have any memory installed.

Have a quote from somewhere else? Click Here
Stock # 64841-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Ametek / VTI Instruments / VXI Technology VT1563A / VT1564A Digitizers

  • 800 kSamples (14-Bit Resolution)
  • Continuous and Transient Voltages up to 256 V
  • 4, 8, 16, 32, 64, and 128 MB PC SIMM Memory
  • All Channels Sample Simultaneously


The Ametek / VTI Instruments / VXI Technology VT1563A (2-channel) and VT1564A (4-channel) Digitizers are 800 kSamples/s (14-bit resolution) digitizers capable of handling both continuous and transient voltages up to 256 V. You cannot upgrade a VT1563A 2-Channel Digitizer to a VT1564A 4-Channel Digitizer.

Both the VT1563A and VT1564A digitizers are register-based instruments that can be programmed at the register level (see Appendix C) or at a higher level using SCPI or VXI plug and play drivers.

The digitizers are ideal for measurements in electomechanical design characterization, particularly in environments with high levels of electrical noise and for characterizing electronic and mechanical transient waveforms.

The VT1563A 2-Channel Digitizer has a fixed 25 kHz input filter per channel that can be enabled. The VT1564A 4-Channel Digitizer has four selectable input filters per channel (1.5 kHz, 6 kHz, 25 kHz and 100 kHz) that can be enabled.

The VT1564A 4-Channel Digitizer has a calibration bus output (High, Low and Guard) and a programmable short. The VT1563A 2-Channel Digitizer does not have a calibration bus output. However, a programmable short is provided for each channel. An external calibration source must be provided for calibration.

Both digitizers use PC SIMM memory. Memory sizes that are supported are 4, 8, 16, 32, 64 and 128 Mbytes. The large memory can easily capture transients or act as FIFO to allow continuous digitizing while unloading data with block mode transfers.

Product Family: VT11564A, VT1563A, VT1563 A, VT1564 A

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Ametek / VTI Instruments / VXI Technology VT1563A / VT1564A Digitizers

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 64841-1 - Ametek / VTI Instruments / VXI Technology VT1563A 2-Channel Digitizer

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)