Gopel PXI 1149.1-B Boundary Scan Controller Module

Gopel PXI 1149.1-B Boundary Scan Controller Module



This Gopel PXI 1149.1-B Boundary Scan Controller Module is used and in excellent condition.

Configuration:

• TAP(s): 2/8
• TAP I/O Level: 1.8..3.3V/5V Tolerant
• TCK Max: 30 MHz
• SPACE Architecture: Yes
• Trigger: PXI/ext.
• Clock: PXI/Int./ext.
• Local Bus: 16 Lines
• SCP Bus: Yes

Part Number: 180-010




Have a quote from somewhere else? Click Here
Stock # 65102-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Gopel PXI 1149.1 Boundary Scan Controller Modules

Features
  • 2 Independent / 8 Synchronized TAPs
  • User Programmable Test Clock
  • Programmable I/O Level for TAPs
  • Configurable 32-Bit PIO

Description

The Gopel PXI 1149.1 Boundary Scan Controller Modules exploits all features of the PXI platform defined for device interoperability and synchronization. Scan operation can be controlled on bit, burst or vector level (handshake) via the trigger lines from other instruments or vice versa. The use of 10 MHz reference clock for entire device operation is possible too.

Due to the accessibility of trigger and clock lines from outside and the support of both local buses, additional integration flexibility is achieved. Thus modular and portable Boundary Scan testers with excellent performance, ideally suited for laboratory and production, are easily configured.

Beside the IEEE 1149.1 controller, the instruments contain two further resources – the 32 bit PIO and the SCP bus controller. The latter unit is needed for working with GOEPEL electronics’ SCANPLUSTM modules which enable the test of not directly scanable parts of the Unit Under Test (UUT). The 32 bit PIO is a general purpose unit for driving or sensing digital signals synchronized to scan bursts.

The Boundary Scan approach is very data intensive. At times, several gigabit have to be handled. The patent pending SPACETM (Scan Power Acceleration by Cellular Encoding) architecture developed by GOEPEL electronics allows continuous bursts with arbitrary length. In difference to traditional solutions that work with linear buffers or fixed data compression, SPACETM is comparable to a serial micro sequencer. Therefore, it can generate complete vector sets on board without host access for two independed TAPs simultaneously. Every TAP has 3 additional fully synchronized TDI signals. This allows gang programming and testing of up to 8 targets. SPACETM also enables real time response pattern comparison and scan synchronized PIO operation. Thus pulse generation with flexible length or event polling become possible.

The PXI 1149.1 instruments are compatible with all industry standard vector formats like SVF, TDS, JAMTM, TBC and COC. Respective translators are available upon request. Every controller is provided with a Dynamic Link Library (DLL) and drivers for LabVIEWTM and LabWindows/CVITM. These drivers allow scan command executions like DRSCAN/IRSCAN and resource access. Features such as Automatic Test Program Generation (ATPG), automatic diagnosis, in-system-programming of FPGA/PLD and Flash EEPROM, high level debugger and strategizer are achieved by using GOEPEL electronics’ leading Boundary Scan software SYSTEM CASCONTM.

The type of controller fitting your requirements best depends on application complexity. For standard test procedures like interconnection tests or simple cluster tests and FPGA programming, PXI 1149.1-A is the right choice. To cover FLASH programming or complex cluster tests and device tests, PXI 1149.1-B is recommended. Due to the cross compatibility of the new PXI instruments with other controllers from GOEPEL electronics (PCI, VXI, PC/AT, PC CARD, ...) migration of existent test programs is easy. For UUTs with more than two TAPs, an extension box with 8 TAPs is available upon request.


Product Family: PXI 1149.1-A, PXI 1149.1 A, PXI 1149.1A, PXI-1149.1-A, PXI-1149.1 A, PXI-1149.1A, PXI1149.1-A, PXI1149.1 A, PXI1149.1A, PXI 1149.1-B, PXI 1149.1 B, PXI 1149.1B, PXI-1149.1-B, PXI-1149.1 B, PXI-1149.1B, PXI1149.1-B, PXI1149.1 B, PXI1149.1B


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Gopel PXI 1149.1 Boundary Scan Controller Modules


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Goepel PXI 1149.1 Datasheet (pdf) 
Goepel PXI/PCI Guide (pdf) 
Link to Gopel Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 65102-1 - Gopel PXI 1149.1-B Boundary Scan Controller Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html