Measurement Computing CIO-DAS08 Multifunction Analog and Digital I/O Board
- Eight Single-Ended Channels of 12-Bit Analog Input
- Three 16-Bit Down Counter Channels
- Three Digital Inputs
- Four Digital Outputs
- 24 Digital I/O Lines
The CIO-DAS08 is a multifunction analog and digital I/O board supported under popular Microsoft® Windows® operating systems.
The CIO-DAS08 provides eight single-ended channels of 12-bit analog input, three 16-bit down counter channels, three digital input, four digital output, and 24 digital I/O lines.
The analog input range and polarity are selectable with an on-board switch. Bipolar input ranges are ±10 V and ±5 V. The Unipolar input range is 0 to +10 V.
You select the base address with on-board dip switches. The interrupt level and pacer source are jumper-selectable. You can set the pacer source to use the internal PC clock or an external clock.
The CIO-DAS08 has a 37-pin analog connector and an on-board 37-pin digital connector.
Four digital output bits and three digital input bits are provided on the board's main connector. A 37-pin connector mounted on the board provides 24 digital I/O bits based on the 82C55 specification. The 24 bits are configured as two eight-bit ports and two four-bit ports. Each of these ports may be individually programmed as input or output.
Product Family: CIO-DAS08, CIODAS08, CIO DAS08, DAS08
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.