Abaco Systems / VMIC VMIVME-5531M-000 Master Fiber-Optic Repeater Link
  • GE_Fanuc_VMIC_VMIVME_5531M_000_View1_201696102448
  • GE_Fanuc_VMIC_VMIVME_5531M_000_View2_201696102448
  • GE_Fanuc_VMIC_VMIVME_5531M_000_View3_201696102448

Abaco Systems / VMIC VMIVME-5531M-000 Master Fiber-Optic Repeater Link



Part Number: 332-000166-000 C



Stock # 65228-3
In Stock: Yes
Price: Contact Us
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / VMIC VMIVME-5531 VMEbus Fiber-Optic Repeater Link

Features
  • Maximum Transfer Rate of 1 MB/s
  • Plug and Play Operation
  • Total Electrical Isolation Between VME Systems
  • VMIVME-5531L is a Form, Fit, and Function Replacement for VMIVME-5530

Description

The GE Fanuc / VMIC VMIVME-5531 VMEbus Fiber-Optic Repeater Link is a high performance, yet easy-to-use method of linking two or more VME systems together via fiber-optic cable. The Repeater Link is a two board set which allows VME slave I/O boards residing in one VME chassis to be controlled by a VME master residing in another chassis. In general, the VME chassis in which VME masters reside is referred to as a primary chassis, while the VME slave boards reside in a secondary chassis. The two board set is configured with one board designated for the primary chassis while the other board is designated for the secondary chassis. A master VME chassis can communicate with several secondary chassis by using multiple REPEATER Links in a star configuration.

The link is software transparent. Any VME master in the primary chassis may access (read or write) to any slave board in the secondary chassis. Only non-interrupting slave boards are allowed in the secondary chassis. The link between the primary chassis and secondary chassis is automatically established when a VME master (typically a CPU board) addresses any board in the secondary chassis.

Any time a master in the primary chassis issues a VME read/write cycle, it will be repeated to the secondary chassis. If a slave board in any secondary chassis responds to that address, the data transfer (read or write) will occur between the chassis and a Data Transfer Acknowledge (DTACK) will be generated to the master (in primary chassis) to complete the cycle.

A link consists of two boards (VMIVME-5531M and VMIVME-5531S) and two cables which enable a VME system to be expanded beyond a single chassis.

A link reset switch located on the front panel of the VMIVME-5531M allows the user to assert SYSRESET in the secondary chassis without resetting the primary (or additional secondary chassis in multiple link configurations). When SYSRESET is asserted in the primary chassis it is repeated to all secondary chassis.

Both the VMIVME-5531M and VMIVME-5531S have a bi-color LED which indicates the status of the link. The LED is green when the local receiver has achieved phase-lock and frame synchronization with the remote transmitter. A red LED indicates that the link is not ready which may be due to damaged or miswired cables, unpowered remote chassis, or a damaged link. The LED is red momentarily during reset.


Product Family: VMIVME-5531, VMIVME-5531L, VMIVME-5531M, VMIVME-5531S, VMIVME 5531, VMIVME 5531L, VMIVME 5531M, VMIVME 5531S, VMIVME5531, VMIVME5531L, VMIVME5531M, VMIVME5531S


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / VMIC VMIVME-5531 VMEbus Fiber-Optic Repeater LinkAbaco Systems / VMIC VMIVME-5531 VMEbus Fiber-Optic Repeater Link


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 65228-3 - Abaco Systems / VMIC VMIVME-5531M-000 Master Fiber-Optic Repeater Link


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html