Curtiss-Wright / DY-4 SVME-160-438 VME Module -Conformal Coated

Curtiss-Wright / DY-4 SVME-160-438 VME Module -Conformal Coated



This unit ships sealed in the manufacturer's static bag.

Configuration:
• Processor: 25 MHz
• SRAM: 256 KB
• Flash: 512 KB

Part Number: 900796-008




Have a quote from somewhere else? Click Here
Stock # 65387-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Curtiss-Wright / DY-4 SVME-160 VME Module

Features
  • 68040 CPU at 25 MHz
  • Ten 32-Pin JEDC Sites
  • Off-Card Battery Back-Up for SRAM
  • 512 Byte Serial EEPROM
  • Advanced VME Interface Chip (SCV64)
  • Three 16-Bit Cascadable Counter/Timers
  • Two EIA-423-Compatible Serial Channels
  • Three General Purpose P2 I/O Lines
  • Real-Time Calendar Clock (RTCC)
  • Tick and Watchdog Timers
  • Built-In-Test
  • Foundation Firmware
  • Conduction Cooled

Description

The Curtiss-Wright / DY-4 SVME-DMV-160 SBC combines a high-performance, 25 MHz 68040 processor and up to 4M bytes of memory on one VME/VSB-compatible circuit card. Some of the important utility features found on the SVME/DMV-160 SBC include two serial ports, RTCC, and ten 32-pin JEDEC sites. The SVME/DMV-160's design features address mission-critical demands of military and aerospace systems integrators with increased computing performance, selftest coverage and functional density.

The card supports DY 4 Systems' common features including an AVICS-based VMEbus interface, Built-In-Test (BIT), BI-mode®, location monitor, and Auto ID. These features bring benefits in performance, logistics and maintenance.

DY 4's custom-designed SCV64 chip implements all VMEbus interface functions with software-programmable features. It combines low-latency access to the VMEbus with high sustained throughputs. Built-In-Test (BIT) hardware features verify all operational circuits on the module. Bus Isolation mode (BI-mode®) increases ease of testing and system fault location. The location monitor supports efficient interprocessor messaging, to minimize overhead in real-time software.


Product Family: SVME160, SVME 160, SVME 160, SVME160448, SVME160-448, SVME160 448, SVME 160448, SVME 160-448, SVME 160 448, SVME-160448, SVME-160-448, SVME-160 448


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Curtiss-Wright / DY-4 SVME-160 VME ModuleCurtiss-Wright / DY-4 SVME-160 VME ModuleCurtiss-Wright / DY-4 SVME-160 VME Module
Curtiss-Wright / DY-4 SVME-160 VME Module


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Curtiss-Wright / DY-4 SVME-160 Datasheet (pdf) 
Link to Curtiss-Wright / DY-4 Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 65387-2 - Curtiss-Wright / DY-4 SVME-160-438 VME Module -Conformal Coated


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html