DynamicSignals / Kinetic Systems V505 4-Channel Communications Interface

DynamicSignals / Kinetic Systems V505 4-Channel Communications Interface

This Kinetic Systems V505 4-Channel Communications Interface is used and in excellent condition.

Model Number: V505-BA11

Have a quote from somewhere else? Click Here
Stock # 65435-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
DynamicSignals / Kinetic Systems V505 4-Channel Communications Interface

  • Four Independent RS-232 Ports
  • 1024 by 8 Character Buffers on Input and Output
  • 16 Transmission Speeds from 50 to 19,200 Baud
  • Hardware Handshaking Signals
  • Programmable XON/XOFF Handshaking
  • Software Selectable Control Character Recognition
  • Programmable Configuration Parameters


The V505 is a single-width, C-size, register-based, VXIbus module that interfaces a VXIbus chassis to as many as four separate RS-232 serial ports. Sixteen data rates are available. They are software programmable on a per-channel basis as are the number of data bits (from five to eight), the number of stop bits (one or two), parity error checking, and control character recognition capabilities.

Two 1024-character buffers are provided for each channel, one for input and one for output. These buffers provide elastic communications between the VXIbus mainframe and remote devices. As a diagnostic aid, input data can be echoed back to the output as well as sent to the computer. The echo feature is programmable.

On output transfers, the V505 continues to transmit a block of data at the selected Baud rate until the output buffer is empty. The output buffer can be reflled by writing and checking for a buffer-full condition.

For input transfers, the input buffer is filled and an interrupt is generated. The interrupt is detected by a computer which reads the input buffer and checks for an end-of-block condition. This condition means that either the input buffer is empty or that the End-of-Block character has been read. The software-selectable End-of-Block character allows the user to specify a single bit pattern or character (a Carriage Return, for example) which, when detected, can be used to generate an interrupt. The interrupt is defined by the user and can indicate a variety of conditions (as with the Carriage Return, that a line of text is available to be read by the computer).

Data-Terminal-Ready (DTR) and Data-Set-Ready (DSR) control signals establish an automatic handshake with the remote RS-232 device. For incoming data streams, the DTR output is negated if the input buffer becomes full and cannot accept another character. DTR is reasserted once the input buffer is read and adequate storage space is available for more data. For outgoing data streams, data transmission is halted if the remote device negates the DSR signal, and commences again (assuming there is still data to transmit) when DSR is reasserted. Additionally, the XON/XOFF protocol can be enabled and disabled. Once enabled, this protocol performs a software handshake similar to the hardware DTR/DSR handshake, and is transparent to the user.

A light-emitting diode (LED) on the V505 front panel flashes whenever software addresses the module. An Interrupt LED is on whenever an interrupt source is pending in the module. Connections to the remote devices are made through four 9-pin “D” type connectors on the front panel.

The V505 supports both static and dynamic configuration. Access to the data is through memory locations indicated by the Offset Register within the VXIbus Configuration Register set, using A24/A16, D16 data transfers.

Product Family: V505, V 505, V-505

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Kinetic Systems V505 4-Channel Communications Interface

Contact Us
Manuals, Datasheets, Drivers, Links

Kinetic Systems V505 Datasheet (pdf) 
Link to DynamicSignals / Kinetic Systems Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 65435-1 - DynamicSignals / Kinetic Systems V505 4-Channel Communications Interface

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html