Corning OM-400 Series Optical Power Meters
  • Corning_OM_410_View1
  • Corning_OM_410_View2
  • Corning_OM_410_View3
  • Corning_OM_410_View4
  • Corning_OM_410_View5

Corning OM-400 Series Optical Power Meters

Features

  • Rugged and Compact Handheld Meter
  • Calibrated for 10 Wavelengths from 830 nm to 1625 nm
  • Field-Interchangeable Connector Adapters
  • Remote Power Level Referencing with Compatible Sources
  • Frequency Modulation and Automatic Wavelength Detection Modes
  • Automatic Offset Nulling Under Normal Temperature and Humidity Conditions
  • AC and Battery Operation with Battery Life of Greater than 300 Hours

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This Corning OM-410 Optical Power Meter is new from surplus stock. This unit includes standard accessories and documentation.

Part Number: OM-410

Configuration:

• Adapters Included: SC and ST
• Power Meter Port: Ge
• Power Range (dBm): 10 to -60
• Range Displayed (dBm): Down to -65
• Number of Calibrated Wavelengths: 10
• Power Uncertainty: ±5% ±1 nW
• Resolution (dB): 0.01
• Display Units: dB/dBm/W




  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The Corning Cable Systems OM-400 Series Optical Power Meter provides accurate, user-friendly and economical power throughput and attenuation testing capabilities for incoming inspections, maintenance, troubleshooting, and system verification. The OM-400 features an ergonomic design that is rugged enough to withstand the harshest testing environments.

The OM-400 is a multifunctional optical power meter with 10 calibrated wavelengths and associated reference values. Calibrated wavelengths range from 830 nm to 1625 nm, making the OM-400 ideal for testing both single-mode and multi-mode fiber optic installations. Preferred testing wavelengths can be stored in a list of favorite wavelengths.

The OM-400 Series Power Meter offers signal modulation detection settings for 270 Hz, 1 kHz, 2 kHz, CW (unmodulated) and Auto signals. A modulation detection setting of Auto allows the OM-400 to automatically detect the wavelength being transmitted by a compatible Corning Cable Systems source. Additionally, the OM-400 can be configured to receive a reference power level from a compatible source over a long distance, allowing a remote reference to be set without the source and meter being at the same location.

The OM-400 Series Power Meter includes a screw-on type connector adapter which allows the user to adjust the meter for the desired connector type under test in the field with no tools.

Product Family: OM400, OM 400, OM-400, OM410, OM 410, OM4-10, OM420, OM 420, OM-420
Contact Us
Share:

Specifications

Power Meter PortOM-410: Ge
OM-420: GeX
Power Range (dBm)OM-410: 10 to -60
OM-420: 26 to -50
Range Displayed (dBm)OM-410: Down to -65
OM-420: Down to -50
Number of Calibrated WavelengthsOM-410: 10
OM-420: 10
Power UncertaintyOM-410: ±5% ±1 nW
OM-420: ±5% ±10 nW
Resolution (dB)OM-410: 0.01
OM-420: 0.01
Automatic Offset NullingOM-410: Yes
OM-420: Yes
Warmup Time(s)OM-410: 0
OM-420: 0
Display UnitsOM-410: dB/dBm/W
OM-420: dB/dBm/W
Automatic Wavelength RecognitionOM-410: Yes
OM-420: Yes
Screen Refresh Rate (Hz)OM-410: 3
OM-420: 3
Tone Detection (Hz)OM-410: 270, 1K, 2K
OM-420: 270, 1K, 2K
Battery Life Typical (hours)OM-410: >300
OM-420: >300
Recommended Calibration Interval (years)OM-410: 3
OM-420: 3
Dimensions18.5 x 10.0 x 5.5 cm (7.25 x 4 x 2.125 in)
Weight0.4 kg (0.9 lb)
Operating Temperature−10 to 50 C (14º to 122º F)
Storage Temperature−40 to 70 C (−40º to 158º F)
Relative Humidity0% to 95% non-condensing


Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

Corning OM-400 Series Datasheet (pdf) 
Link to Corning Website