Abaco Systems / SBS / Greenspring IP-UNIDIG-I-ET IndustryPack with 24 Differential I/O Lines and Interrupts and Extended Temperature

Abaco Systems / SBS / Greenspring IP-UNIDIG-I-ET IndustryPack with 24 Differential I/O Lines and Interrupts and Extended Temperature



This unit features steel plating and conformal coating.

Part Number: 0340-1157




Have a quote from somewhere else? Click Here
Stock # 66311-36
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / SBS / Greenspring IP-UD-ID / IP-UNIDIG-I IndustryPack Module with 24 Differential I/O Lines and Interrupts

Features
  • 24 Differential Digital I/O lines
  • Each Line Programmable as Input or Output
  • Each Line may Generate an Interrupt
  • Double-Buffered Output

Description

The GE Fanuc / SBS / Greenspring IP-UD-ID / IP-UNIDIG-I IndustryPack Module with 24 Differential I/O Lines and Interrupts provides 24 flexible input/output signal lines with differential output drivers and differential inputs. Any input may be programmed to generate an interrupt. Inputs and outputs meet EIA-422 and EIA-485 specifications with an extended common mode range of +12 V to -7 V. Each line may be dynamically and individually configured for either input or output, providing maximum flexibility. Outputs may be double buffered, making the IndustryPack compatible with simulation systems requiring many outputs to be latched simultaneously. The output driver for each bit is controlled by a 24 bit register. Writing a "0" to a bit in the control register turns on the corresponding output driver. Writing a "1" turns the driver off and puts the line in a high impedance state. This is the power up default. With the driver turned off, the line may be used for input. A socketed termination resistor is placed across the plus and minus lines of each input. Each resistor is part of an eight pin SIP with four individual resistors. The socket allows the user to change the value or eliminate the termination all together. 100 Ohm resistors are the factory default.

Output lines are double buffered, with the clock source for the external latch selectable between either the internal 8 MHz IndustryPack clock or an external source with programmable polarity. The external clock source is a single ended signal, unlike the other differential I/O lines. The same clock source latches the input lines. The IndustryPack can function in a Master/Slave Mode for synchronizing multiple IndustryPacks. In this mode, the Master IndustyPack redrives the external clock source out I/O line 23. This line becomes the Master Clock, which should be wired to I/O line 24 on the Master and all Slave IndustryPacks. These features make the IndustryPack compatible with simulation systems requiring many inputs and outputs to be latched simultaneously. Slave Mode may also be used if the external clock source is differential. In this mode, only 23 I/O lines are available, as I/O line 24 becomes a dedicated clock input. The IndustryPack uses differential output latches with internal read back for verification.


Product Family: IP-UD-ID, IP-UNIDIG-I


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / SBS / Greenspring IP-UD-ID / IP-UNIDIG-I IndustryPack Module with 24 Differential I/O Lines and InterruptsAbaco Systems / SBS / Greenspring IP-UD-ID / IP-UNIDIG-I IndustryPack Module with 24 Differential I/O Lines and Interrupts


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 66311-36 - Abaco Systems / SBS / Greenspring IP-UNIDIG-I-ET IndustryPack with 24 Differential I/O Lines and Interrupts and Extended Temperature


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html