Abaco Systems / SBS / Greenspring IP-HSPIO 16-Bit Buffered High Speed Parallel Input Output IndustryPack Module
Features
- FIFO Buffered I/O Capability
- 7-Bit Control and Status Register
- FIFO Status Monitoring
Description
The GE Fanuc / SBS / Greenspring IP-HSPIO 16-Bit Buffered High Speed Parallel Input Output IndustryPack Module provides FIFO buffered, 16-bit wide I/O capability between its carrier board and an external peripheral device. The input FIFO and output FIFO are each 8 K words deep. The IP-HSPIO provides a 7-bit control register (output) and a 7-bit status register (input). These registers are available for controlling and monitoring the peripheral device connected to the IP-HSPIO. All peripheral device interface signals use RS-422 differential drivers and receivers. All resources on the IP-HSPIO are mapped into the IndustryPack I/O space.
The IP-HSPIO includes option 95112C. This option uses bit 4 (PCTRL4) of the peripheral control register (OUTCNTRL-offset 0xC) to implement a software controlled driver enable for the RS-422 drivers on the XFREQ_IN, XFREQ_OUT, PCTRL0, and PCTRL1 signals. The default state for the bit is '0' after power on or master reset. When bit 4 is '0', the RS-422 drivers on the XFREQ_IN, XFREQ_OUT, PCTRL0, and PCTRL1 signals are disabled. Bit 4 of the peripheral control register must be set to '1' to enable these RS-422 drivers.
Product Family: IP-HSPIO, IPHSPIO, IP HSPIO
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.