Abaco Systems / Ramix PMC694 Dual 10-100BaseTX PMC Ethernet Module

Abaco Systems / Ramix PMC694 Dual 10-100BaseTX PMC Ethernet Module

This GE Fanuc / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module is used and in excellent condition. This unit features a faceplate that exposes (1) ethernet connector.

Part Number: 14-0770D00

Have a quote from somewhere else? Click Here
Stock # 67385-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Abaco Systems / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module

  • Single RS232 Port Front Accessed
  • TCP/UDP Checksum Off Loading
  • Two 10/100Mbit Connection Ports Via RJ-45
  • On-Board PPC 250MHz RISC Processor
  • PCI 64/33MHz


The GE Fanuc / Ramix PMC694 sets a new standard for high performance data exchange. Two 10/100 Mbit Ethernet controllers are combined with a local RISC processor and PCI bridge system. The result is a very high performance, extremely flexible solution to a variety of data transfer requirements. Designed using standard protocols (100Mbit Ethernet and PCI/PMC), the PMC694 is intrinsically economical, both in terms of direct unit cost and ability to utilize commodity LAN hubs and switches. In addition, card edge PCI systems can be accommodated using our PMC239 adapter, for rapid prototype and development. The on-board RISC processor allows the PMC694 to be used in a wide range of applications. In the simplest mode, all control can be kept in the system host, with the PMC694 providing dual Ethernet access. Other options include "dual rail" access, where the choice of physical access is automatically switched by the PMC694 failover. Our embedded TCP/IP allows the host to off-load the TCP/IP overhead to the local I/O co-processor. The on-board processor has 32 Mbytes of SDRAM and 512Kbytes of FLASH. All I/O is via the front panel RJ45 connectors. Users can add application-specific functionality to the on-board firmware, migrating appropriate control into the PMC694.

Product Family: PMC694, PMC-694, PMC 694

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

GE Fanuc / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module

Contact Us
Manuals, Datasheets, Drivers, Links

GE Fanuc / Ramix PMC694 Datasheet (pdf) 
Link to Abaco Systems / Ramix Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 67385-2 - Abaco Systems / Ramix PMC694 Dual 10-100BaseTX PMC Ethernet Module

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html