GE Fanuc / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module
  • Ramix_PMC694_View1

GE Fanuc / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module

Features

  • Single RS232 Port Front Accessed
  • TCP/UDP Checksum Off Loading
  • Two 10/100Mbit Connection Ports Via RJ-45
  • On-Board PPC 250MHz RISC Processor
  • PCI 64/33MHz

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This GE Fanuc / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module is used and in excellent condition.

Part Number: 14-0770D00





This GE Fanuc / Ramix PMC694 Dual 10/100BaseTX PMC Ethernet Module is used and in excellent condition. This unit features a faceplate that exposes (1) ethernet connector.

Part Number: 14-0770D00




  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

The GE Fanuc / Ramix PMC694 sets a new standard for high performance data exchange. Two 10/100 Mbit Ethernet controllers are combined with a local RISC processor and PCI bridge system. The result is a very high performance, extremely flexible solution to a variety of data transfer requirements. Designed using standard protocols (100Mbit Ethernet and PCI/PMC), the PMC694 is intrinsically economical, both in terms of direct unit cost and ability to utilize commodity LAN hubs and switches. In addition, card edge PCI systems can be accommodated using our PMC239 adapter, for rapid prototype and development. The on-board RISC processor allows the PMC694 to be used in a wide range of applications. In the simplest mode, all control can be kept in the system host, with the PMC694 providing dual Ethernet access. Other options include "dual rail" access, where the choice of physical access is automatically switched by the PMC694 failover. Our embedded TCP/IP allows the host to off-load the TCP/IP overhead to the local I/O co-processor. The on-board processor has 32 Mbytes of SDRAM and 512Kbytes of FLASH. All I/O is via the front panel RJ45 connectors. Users can add application-specific functionality to the on-board firmware, migrating appropriate control into the PMC694.

Product Family: PMC694, PMC-694, PMC 694
Contact Us
Share:

Specifications

Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

GE Fanuc / Ramix PMC694 Datasheet (pdf) 
Link to Abaco Systems / Ramix Website