Abaco Systems / SBS / Greenspring PMC-Octal Pro-232 Serial Communication PMC
  • SBS_PMC_Octal_Pro232_View1
  • SBS_PMC_Octal_Pro232_View2
  • SBS_PMC_Octal_Pro232_View3

Abaco Systems / SBS / Greenspring PMC-Octal Pro-232 Serial Communication PMC



This GE Fanuc / SBS / Greenspring PMC-Octal Pro-232 Serial Communication PMC is used and in excellent condition.

Part Number: 0390-1575A, PMC-OCTPR-232, 91915751 REV A98122

Product Family: 5998-01-542-8910 5998015428910




Have a quote from somewhere else? Click Here
Stock # 70055-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / SBS / Greenspring PMC-Octal Pro-232 / PMC-Octal Pro-422 Serial Communication PMC Module

Features
  • Two Quad UARTs (Eight UART Channels)
  • 128 bytes of transmit FIFO, 128 Bytes of Receive FIFO Per Channel
  • Up to 115.2 kbps is Supported

Description

PMC-Octal Pro-232
The PMC-Octal Pro-232 conveniently provides eight high performance asynchronous EIA-232 serial channels. A similar product, the PMC-Octal Pro-422, provides eight channels of EIA-422. The PMC-Octal Pro-232 features two Quad UARTs, with 128 bytes of transmit FIFO and 128 bytes of receive FIFO per channel. Up to 115.2 kbps is supported. Each channel of RS-232 has six serial signals - TxD, RxD, CTS, RTS, DSR, and DTR. All signals are routed to the front 68-pin connector, as well as the PMC back panel (P4) I/O connector. A breakout cable and a 68-pin terminal block is available for convenient signal access. These are recommended for prototype development. A 7.3728 MHz standard oscillator is used to provide standard asynchronous baud rates. Baud rate is software configurable from 50 bps to 460.8 kbps, via the on-board programmable baud rate generator. An empty oscillator site is also available on-board, for custom baud rate generation. Interrupts are fully supported with four programmable transmit/receive FIFO interrupt trigger levels. In addition, programmable bit length, parity and stop bits are provided to support all asynchronous protocols. The module is compliant with standard PMC specifications IEEE P1386.1.

PMC-Octal Pro-422
The PMC-Octal Pro-422 conveniently provides eight high performance asynchronous EIA-422 serial channels. A similar product, the PMC-Octal Pro-232, provides eight channels of EIA-232. The PMC-Octal Pro-422 features two Quad UARTs, with 128 bytes of transmit FIFO and 128 bytes of receive FIFO per channel. Up to 460.8 kbps is supported.

Each channel of EIA-422 has four pairs of differential serial signals - TxD+, TxD-, RxD+, RxD-, CTS+, CTS-, RTS+, and RTS-. All signals are routed to the front 68-pin connector, as well as the PMC back panel (P4) I/O connector. A breakout cable and a 68-pin terminal block is available for convenient signal access. These are recommended for prototype development.

A 7.3728 MHz standard oscillator is used to provide standard asynchronous baud rates. Baud rate is software configurable from 50 bps to 460.8 kbps, via the on-board programmable baud rate generator. An empty oscillator site is also available on-board, for custom baud rate generation. Interrupts are fully supported with four programmble transmit/receive FIFO interrupt trigger levels. In addition, programmable bit length, parity and stop bits are provided to support all asynchronous protocols.


Product Family: PMC-OctalPro-232, PMC OctalPro232, PMC OctalPro 232, PMC-OctalPro-422, PMC OctalPro422, PMC OctalPro 422


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / SBS / Greenspring PMC-Octal Pro-232 / PMC-Octal Pro-422 Serial Communication PMC Module
PMC-Octal Pro-232


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 70055-1 - Abaco Systems / SBS / Greenspring PMC-Octal Pro-232 Serial Communication PMC


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html