Acromag / Xembedded / Xycom XVME-540 Analog Input/Output Module

Acromag / Xembedded / Xycom XVME-540 Analog Input/Output Module

This Xembedded / Xycom XVME-540 Analog Input/Output Module is new from surplus stock. This unit ships in the manufacturer's packaging with standard documentation and accessories.

Part Number: 70540-001

Have a quote from somewhere else? Click Here
Stock # 70628-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Acromag / Xembedded / Xycom XVME-540 Analog Input/Output Module

  • 32 Single-Ended or 16 Differential Input Channels
  • Inputs are Configurable as Bipolar or Unipolar
  • 12-Bit Conversion
  • Three Ranges of Programmable Gain
  • Jumper-Selectable Input/Output Voltage Ranges
  • Four Input Sampling Modes
  • Four Output Channels, Each Selectable for Voltage or Current Output


The Xembedded / Xycom XVME-540 Analog Input/Output Module is a powerful, VMEbus-compatible I/O module that can perform 12-bit A/D and D/A conversions.

The XVME-540 contains 32 single-ended or 16 differential analog input channels. The input channels can be programmed to operate in any one of four operating modes: random channel sampling, sequential channel sampling, single-channel sampling, and sampling based on an external trigger. The XVME-540 has programmable gain available within one of three jumper-selected ranges.

The XVME-540 also contains four analog output channels. These output channels can be configured as either voltage or current outputs.

Product Family: XVME-540, XVME 540, XVME540

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Number of Channels4
AccuracyResolution: 12 bits
Overall Error: ±1/2 LSB
Differential Linearity: ±1 LSB
Voltage Output CharacteristicsRanges: 0-5 V, 0-10 V, ±5 V, ±10 V
Output Current: 5 mA min. at ±10 V
Settling Time: 50 µsec
Load Resistance Range: 50-500 ohms
Offset T.C.: 75 ppm/°C
Gain T.C.: 100 ppm/°C
Current Loop CharacteristicsRange: 4-20 mA, non-isolated
Compliance Voltage: 10 V at 20 mA
Loop Supply Voltage: +15 V to +30 V
Settling Time: 50 µsec
Load Resistance Range: 50-500 ohms
Offset T.C.: 75 ppm/°C
Gain T.C.: 100 ppm/°C
Digital Input CodingBIN, OBN
Number of ChannelsSingle-Ended: 32
Differential: 16
A/D Input Full Scale Voltage Ranges (G=1)Unipolar: 0-5 V, 0-10 V
Bipolar: ±2.5 V, ±5 V and ±10 V
Programmable GainRange 1: 1, 2, 5, or 10
Range 2: 4, 8, 20, 50, or 100
Range 3: 10, 20, 50, or 100
Maximum Input VoltagePower On: 44 V
Power Off: 30 V
Input Impedancew/22 MΩ Resistor: 17 MΩ, min.
w/o 22 MΩ Resistor: 100 MΩ, min.
Bias Current±100 nA, max.
Input Capacitance225 pF, max.
Operating Common Mode Voltage+13 V/−11 V
Common Mode Rejection Ratio60 db, min.
External Trigger to Sample25 µsec
Conversion TimeSingle-Channel Mode: <25 µsec
All Other Modes: <50 µsec
ThroughputSingle-Channel Mode: 40 KHz
All Other Modes: 20 KHz

Contact Us

Item Images

Click a thumbnail to view larger image:

Acromag / Xembedded / Xycom XVME-540 Analog Input/Output Module

Contact Us
Manuals, Datasheets, Drivers, Links

Xembedded / Xycom XVME-540 Datasheet (pdf) 
Link to Acromag / Xembedded / Xycom Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 70628-2 - Acromag / Xembedded / Xycom XVME-540 Analog Input/Output Module

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)