Abaco Systems / VMIC VMIVME-3417-200 16-Channel Isolated Signal Conditioning VME Board

Abaco Systems / VMIC VMIVME-3417-200 16-Channel Isolated Signal Conditioning VME Board


• 40 Hz Input Filters

Part Numbers: 332-103417-200A

Have a quote from somewhere else? Click Here
Stock # 71729-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Abaco Systems / VMIC VMIVME-3417A 16-Channel Isolated Signal Conditioning VME Board

  • 16 Isolated Differential Low-Level Analog Input Channels
  • Channel-to-Channel and Channel-to-VMEbus Isolation to 700 VRMS, 1,000 VDC
  • Optional Current Loop Termination Input Resistors
  • Buffered High-Level Analog Outputs
  • Input Ranges Selectable from ±5 mV to ±10 V


The GE Fanuc / VMIC VMIVME-3417A 16-Channel Isolated Signal Conditioning VME Board is designed to accept low-level differential inputs directly from temperature and pressure transducers, or from any other low-level analog signal source. All 16-channel inputs are isolated from each other and from the VMEbus. Although the VMIVME-3417A Board can be used with any high-level analog input board, it is designed specifically as a companion to VMIC's 64-channel Scanning A/D Converter Boards, such as VMIVME-3113A, -3122.

When used in conjunction with 64-channel A/D boards, the VMIVME-3417A provides full-scale input ranges from ±5 mV to ±10 V. Two-pole low pass input ?lters are available with cutoff frequencies of 4, 40, or 400 Hz. Optional current loop termination input resistors are available, and replace the input ?lter.

Open thermocouple inputs at a gain of x100 and x1,000 are detected by forcing the open channel offscale in the negative direction. An input bias current of approximately 40 nA is provided for this function, and will force the channel output offscale within 3 seconds at a gain of x1,000. Open thermocouple inputs at a gain of x1 and x10 are detected by forcing the open channel within the negative voltage range.

For total cable compatibility with the 64-Channel A/D Converter Boards, the 16 outputs can be jumper designated either as Channels 0 to 15 or as Channels 16 to 31, if installed at P3 and as Channels 32 to 47 or as Channels 48 to 63, if installed at P4. This feature permits two VMIVME-3417A Boards to be connected to either of the 32-channel input connectors on the A/D Converter Board, with a single 96-wire multidrop ribbon cable.

Built-in-Test (BIT) is supported by connecting the output buffers to an externally supplied reference voltage from the P2 connector. BIT is controlled by a TTL P2 input. The VMIVME-4125 is designed to control BIT and provide a calibration reference.

The VMIVME-4125 can produce a reference voltage of zero (cal. zero) and a variety of positive and negative reference voltages that approach full scale or most ADC applications, (cal. span).

Product Family: VMIVME3417A, VMIVME 3417A, 3417

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Abaco Systems / VMIC VMIVME-3417A 16-Channel Isolated Signal Conditioning VME Board

Contact Us
Manuals, Datasheets, Drivers, Links

GE Fanuc / VMIC VMIVME-3417A Datasheet (pdf) 
Link to Abaco Systems / VMIC Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 71729-1 - Abaco Systems / VMIC VMIVME-3417-200 16-Channel Isolated Signal Conditioning VME Board

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html