DynamicSignals / GaGe CompuScope 1012 ISA Bus A/D and Oscilloscope Module

DynamicSignals / GaGe CompuScope 1012 ISA Bus A/D and Oscilloscope Module



This DynamicSignals / GaGe CompuScope 1012 ISA Bus A/D and Oscilloscope Module is used and in excellent condition. This unit has a CompuScope 1012 / 6012 Memory Module installed.

Configuration:
• Memory: 1 MB
• Sampling Rate:
      Channel A: 20 MSPS max
      Channel B: 10 MSPS max

Part Number: CompuScope 1012-1M




Have a quote from somewhere else? Click Here
Stock # 75512-4
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
DynamicSignals / GaGe CompuScope 1012 A/D And Oscillopscope Module for IBM PC AT

Features
  • 20 MSPS, 12 Bit Sampling
  • Interrupt Capability
  • Pre-Trigger Data
  • Shielded Analog Input
  • Flexible Triggering
  • Gated Digitization
  • External Clock

Description

The DynamicSignals / GaGe CompuScope 1012 digitizes analog signals with a resolution of 12 bits at a sampling rate of up to 20 MHz and stores the resulting digital pattern in the on-board memory. The IBM PC is then allowed to access the memory and retrieve the data for further processing. The CompuScope 1012 uses two monolithic flash A/D converters, each running at 10 MSPS. In the single channel mode the two ADCs are clocked in a "ping-pong" mode to achieve up to 20 MSPS sampling. On-board programmable gain amplifiers and offset control circuits ensure measurement accuracy and long term thermal stability.

The fast data transfer rate to PC's memory allows the CompuScope 1012 to be used in applications which have a high Pulse Repeat Frequency (PRF). Data can be captured by CompuScope 1012 and transferred to PC's memory in a tight loop up to thousands of times per second. CompuScope 1012 can be made to interrupt the 80x86 processor upon receiving a trigger or upon completion of data storage or upon filling up the memory. Interrupts are selected via switches on the card. Due to the digital nature of the CompuScope 1012, it is capable of storing both pre and post-trigger data, making it a very powerful tool for transient analysis. The amount of post-trigger data can be specified in a GageScope menu or via software, the remaining memory is pre-trigger memory.

The shielded section of the CompuScope 1012 contains programmable gain amplifiers which control the input amplification of the two channels. In addition to the shielding, the six layer CompuScope 1012 printed circuit board also protects sensitive analog signals with three power planes. CompuScope 1012 features state-ofthe- art windowed triggering. Two independent comparators provide triggering from either one or both channels, or from an external signal or a logical combination of them all at two independent trigger levels. In the case of a Multi-Card system, it is possible to have up to 32 trigger sources. A Gated Digitization option can be ordered from the factory. Data is stored in the RAM only when the external TTL GATE input is HIGH. This can be useful when it is desirable to stack successive data captures in the on-board memory. Rise and fall times of the GATE signal must be better than 50 ns.


Product Family: CompuScope 1012, Compuscope 1012, CompuScope-1012, Compuscope 1012, CompuScope 1012-512K, 012-101-002, CompuScope 1012-1M, 012-101-004, CompuScope 1012-2M, 012-101-005, CompuScope 1012-4M, 012-101-006, CompuScope 1012-8M, 012-101-007, CompuScope 1012-16M, 012-101-008


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

DynamicSignals / GaGe CompuScope 1012 A/D And Oscillopscope Module for IBM PC AT
Top View
DynamicSignals / GaGe CompuScope 1012 A/D And Oscillopscope Module for IBM PC AT
Bottom View


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 75512-4 - DynamicSignals / GaGe CompuScope 1012 ISA Bus A/D and Oscilloscope Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html