Emerson / Motorola MPMC860-001 PMC Communication Controller

Emerson / Motorola MPMC860-001 PMC Communication Controller



This Emerson / Motorola MPMC860-001 PMC Communication Controller is used and in excellent condition.

Configuration:
• Type: Dual E1 PMC
• Processor: MPC860MH (50 MHz)
• Memory: 16MB DRAM
• Flash Memory: 2MB Flash
• Front Panel I/O




Have a quote from somewhere else? Click Here
Stock # 75719-4
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Emerson / Motorola MPMC860 Series PMC Communication Controllers

Features
  • MPC860MH PowerPC Quad Integrated Communications Controller
  • Single-Wide PMC Form Factor
  • IEEE P1386.1 PMC Compliant
  • Real-Time Clock
  • 8-Level Interrupt Handler
  • Watchdog Timer
  • Two Software Programmable Status LEDs

Description

The Emerson / Motorola MPMC860 Series PMC Communication Controllers employ the MPC860MH PowerPC Quad Integrated Communications Controller (PowerQUICC), a versatile one-chip dual-processor architecture which provides both a high-performance general-purpose processor for application programming as well as a special-purpose communications processor module (CPM) uniquely designed for communications needs. The CPM contains features that allow the MPC860 to excel in communications and networking products as did the MC68360 QUICC which preceded it. The CPU on the MPC860 is a 32-bit PowerPC implementation that incorporates memory management units (MMUs) and instruction and data caches. The CPM provides the communication features of the MPC860. Included are a RISC processor, four serial communication controllers (SCC), two serial management controllers (SMC), one serial peripheral interface (SPI), one I2C interface, 5 Kbytes of dual-port RAM, an interrupt controller, a time-slot assigner, three parallel ports, a parallel interface port, four independent baud rate generators, and sixteen serial DMA channels to support the SCCs, SMCs, SPI, and I2C. The SDMAs provide two channels of general-purpose DMA capability for each communications channel. They offer high-speed transfers, 32-bit data movement, buffer chaining, and independent request and acknowledge logic. The addition of a multiply-and-accumulate (MAC) function on the CPM further enhances the MPC860, enabling various modem and DSP applications.

The MPMC860SC variant supports a second processor, the MC68360. This processor runs in slave mode, thus enabling the MPC860MH to use its internal CPM. The MC68360 is only present on the MPMC860SC variant where it provides two additional TDM interfaces to the SC4000 or to the framers for channel processing. The SC4000 is used as the TDM switch on the MPMC860SC. The SCbus side of the SC4000 is connected through the Pn4 connector to the carrier board. The SC4000 is capable of acting as a clock master or slave on the SCbus. The SC4000 is capable of receiving data from the processors and the two E1/T1 ports. The SCbus Message Channel output of the SC4000 is connected to the MPC860MH (SCC4) for common channel signaling. The Tundra QSpanTM PCI bridge CA91C860 provides the bridge function between the MPC860 bus and the PCI bus. It provides 32-bit addressing and 32-bit data. The QSpan supports PowerQUICC processor external bus frequencies up to 25 MHz and PCI frequencies up to 33 MHz. The interface is PCI revision 2.1 compliant.

The MPMC860 is populated with 16MB of 32-bit, 60 ns DRAM. The DRAM memory is controlled by the MPC860MH processor. The MPMC860 contains one bank of Flash memory which is populated with one 2MB device (AM29F016). The data bus of the Flash is 8-bits wide. The PMC860 is delivered with the Flash memory containing the Board Initialization and Self-Test firmware.The Dallas Semiconductor DS2154 is used as the E1 controller and the DS2152 as theT1 controller. The controller chips are capable of driving 100 Ohm E1 lines or 120 Ohm T1 lines respectively.



Product Family: MPMC860-001, MPMC860-002, MPMC860-003, MPMC860-004, MPMC860SC-001, MPMC860SC-002, MPMC860SC-005


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Emerson / Motorola MPMC860 Series PMC Communication Controllers


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Emerson / Motorola MPMC860 Series Datasheet (pdf) 
Link to Emerson / Motorola Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 75719-4 - Emerson / Motorola MPMC860-001 PMC Communication Controller


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html