RTD Embedded Technologies AD2110 Industrial Control Board

RTD Embedded Technologies AD2110 Industrial Control Board



This RTD Embedded Technologies AD2110 Industrial Control Board is used and in excellent condition.

Part Number: 602425




Have a quote from somewhere else? Click Here
Stock # 76958-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
RTD Embedded Technologies AD2110 / ADA2110 Industrial Control Boards

Features
  • 16 Single-Ended or 8 Differential Analog Input Channels
  • 12-Bit, 20 Microsecond Analog-to-Digital Converter with 40 kHz Throughput
  • ±5, ±10, or 0 to +10 Volt Input Range
  • Programmable Gains of 1, 2, 4 & 8 with Onboard Gain Multiplier
  • 16 TTL/CMOS 8255-Based Digital I/O Lines Which can be Configured with Pull-Up or Pull-Down Resistors
  • Three 16-Bit Timer / Counters
  • Two 12-Bit Digital-to-Analog Output Channels (ADA2110 Only)
  • ±5, ±10, 0 to +5, or 0 to +10 Volt Analog Output Range (ADA2110 Only)

Description

The RTD Embedded Technologies AD2110 / ADA2110 Industrial Control Boards turn your IBM PC/XT/AT or compatible into a high-performance data acquisition and control system. Theses units are installed within a single short or full size expansion slot in the computer.

The (A/D) circuitry receives up to 16 single-ended or 8 differential analog inputs and converts these inputs into 12-bit digital data words which can then be read and/or transferred to PC memory. The analog input voltage range is jumper-selectable for bipolar ranges of -5 to +5 volts or -10 to +10 volts, or a unipolar range of 0 to +10 volts. The board is factory set for -5 to +5 volts. Overvoltage protection to ±35 volts is provided at the inputs. The high-performance A/D converter supports fast-settling, software programmable gains of 1, 2, 4, and 8 with on-board gain multiplier circuitry so that you can customize the input gain. A/D conversions are performed by an industry standard successive approximation converter. The converter and high-speed sample-and-hold amplifier before it combine to provide a maximum throughput rate of 40 kHz. The converted data is read and/or transferred to PC memory, one byte at a time, through the PC data bus.


Product Family: AD2110, ADA2110, AD-2110, ADA-2110, AD 2110, ADA 2110


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

RTD Embedded Technologies AD2110 / ADA2110 Industrial Control BoardsRTD Embedded Technologies AD2110 / ADA2110 Industrial Control BoardsRTD Embedded Technologies AD2110 / ADA2110 Industrial Control Boards
RTD Embedded Technologies AD2110 / ADA2110 Industrial Control Boards


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 76958-1 - RTD Embedded Technologies AD2110 Industrial Control Board


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html