Hartmann Elektronik 1H00001612 StarFabric-Bridge CPCI Module (3U)
  • Hartmann_Elektronik_THE_Bridge_View1
  • Hartmann_Elektronik_THE_Bridge_View2
  • Hartmann_Elektronik_THE_Bridge_View3
  • Hartmann_Elektronik_THE_Bridge_View4

Hartmann Elektronik 1H00001612 StarFabric-Bridge CPCI Module (3U)



This Hartmann Elektronik 1H00001612 StarFabric-Bridge CPCI Module (3U) is used and in excellent condition.

Configuration:
• Type: 64-bit
• Hotswap Support for System Slot




Have a quote from somewhere else? Click Here
Stock # 78356-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Hartmann Elektronik THE Bridge CompactPCI / PCI Modules

Features
  • 64-Bit PCI Module With Automatic Bus Width Detection
  • 32-Bit and 64-Bit CompactPCI Module With Hotswap Support
  • 33 MHz/66 MHz PCI Bus Clock Frequency
  • Configurable As Root Or Leaf Card

Description

THE Bridge plug-in boards are available in two different designs:
PCI card:
64-bit with automatic bus width detection (32-bit/64-bit) without hotswap support for peripheral slot.
CompactPCI card:
32-bit and 64-bit with hotswap support with or without rear I/O for system or peripheral slot.

Switch S300.1:The bridge can be activated (OFF) or deactivated (ON), depending on whether the card is to be used in transparent or nontransparent mode.
Switch S300.2:The setting of this switch determines whether the card is to operate in the hardware root (OFF) or leaf mode (ON).
Switch S400(on CompactPCI cards):When the switch is set to OFF, the reset button only resets the card. When the switch is set to ON, the entire system is reset.

Link LED:
There are 2 yellow LEDs for each link. These indicate the link status:
• Off: A connection to a StarFabric component does not exist or the RX input is not connected to a TX output.
• Flashing: The connection between two StarFabric components does exist, but has not been initialized by a root, i. e. it is not operable.
• On: The connection is operable.

Status LED:
When the RES LED is lit, the card is undergoing a RESET operation.
When the PWR LED is lit, the VCC is available.
When the FAIL LED of the PCI card is lit, there is a problem with the supply voltage.
When the HS LED of the CompactPCI card or the BOOT LED of the CompactPCI card with rear I/O is lit, the CompactPCI card is being inserted but has not yet been locked in place.


Product Family: 1H00001601, 1H00001612, 1H00001631, 1H00001671, 1H00001642, 1H00001651, 1H00001660, 1H00001680, 1H00001690, 1H00001702, 1H00001712, F006.01301, F006.01302, F006.01305, F006.01310


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Hartmann Elektronik THE Bridge CompactPCI / PCI ModulesHartmann Elektronik THE Bridge CompactPCI / PCI ModulesHartmann Elektronik THE Bridge CompactPCI / PCI Modules
Hartmann Elektronik THE Bridge CompactPCI / PCI Modules


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 78356-1 - Hartmann Elektronik 1H00001612 StarFabric-Bridge CPCI Module (3U)


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html