Abaco Systems / VMIC VMIVME-5532M Master VMEbus Fiber-Optic Repeater Link
  • Abaco_Systems_VMIC_VMIVME_5532M_View1_20174119415
  • Abaco_Systems_VMIC_VMIVME_5532M_View2_20174119415
  • Abaco_Systems_VMIC_VMIVME_5532M_View3_20174119415
  • Abaco_Systems_VMIC_VMIVME_5532M_View4_20174119415

Abaco Systems / VMIC VMIVME-5532M Master VMEbus Fiber-Optic Repeater Link



This unit has conformal coating.

Part Numbers: VME-5532M-000001, 332-010193-001001




Have a quote from somewhere else? Click Here
Stock # 79013-3
In Stock: Yes
Price: Contact Us
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Abaco Systems / VMIC VMIVME-5532 VMEbus Fiber-Optic Repeater Link

Features
  • Maximum Transfer Rate of 1 MB/s
  • Plug and Play Operation
  • Total Electrical Isolation Between VME Systems

Description

The GE Faunc/ VMIC VMIVME-5532 VMEbus Fiber-Optic Repeater Link is a high-performance, yet easy-to-use method of linking two or more VMEbus systems together via fiber-optic cable. The Repeater Link is a two-board set which allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis. In general, the VMEbus chassis in which VMEbus masters reside is referred to as a master chassis, while the VMEbus slave boards reside in a slave chassis. However, the VMIVME-5532 also allows a local VMEbus master to work in a slave chassis for local control, thus providing multimaster in the slave chassis. The two-board set is configured as shown in Figure 1 with one board designated for the master chassis while the other board is designated for the slave chassis. A master VMEbus chassis can communicate with several slave chassis by using multiple REPEATER Links in a star configuration.

The link is software transparent. Any VMEbus master in the master chassis may access (read or write) to any slave board in the slave chassis. Only noninterrupter slave boards are allowed in the slave chassis.

The link between the master chassis and slave chassis is automatically established when a VMEbus master (typically a CPU board) addresses any board in the slave chassis.

Any time a master in the master chassis issues a VMEbus read/write cycle it will be repeated to the slave chassis. If a slave board in any slave chassis responds to that address, the data transfer (read or write) will occur between the chassis and a Data Transfer Acknowledge (DTACK) will be generated to the master (in master chassis) to complete the cycle.

The slave repeater includes a bus arbiter, bus requester, system controller, and Control/Status Registers for manipulating and monitoring the slave chassis when it is being used in a redundant repeater link or multimaster application as shown in Figure 3. The bus arbiter (SGL) and system controller are used when the slave board occupies slot 1 of the slave chassis. The bus requester (ROR) and Control/Status Registers allow the host CPU in the master VMEbus chassis to monitor and gain bus mastership of the slave chassis using bus request level 3 (BR3*). A control bit (burst mode) is included to allow the host CPU to request and hold bus mastership as long as desired. A key register is also included which requires the host CPU to load a matching code before the burst mode bit can be set.

A link consists of two boards (VMIVME-5532M and VMIVME-5532S) and two cables which enable a VMEbus system to be expanded beyond a single chassis.


Product Family: VMIVME-5532S, VMIVME 5532, VMI VME-5532, VMIVME-5532L, VMIVME-5532M


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Abaco Systems / VMIC VMIVME-5532 VMEbus Fiber-Optic Repeater Link


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 79013-3 - Abaco Systems / VMIC VMIVME-5532M Master VMEbus Fiber-Optic Repeater Link


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html