Atlas Copco QCM2-T 340 15 Servo Controller
  • AtlasCopco_QCM2T34015_View1
  • AtlasCopco_QCM2T34015_View2
  • AtlasCopco_QCM2T34015_View3
  • AtlasCopco_QCM2T34015_View4
  • AtlasCopco_QCM2T34015_View5

Atlas Copco QCM2-T 340 15 Servo Controller



This Atlas Copco QCM2-T 340 15 Servo Controller is used and in excellent condition.

Part Number: 4240 0366 81




Have a quote from somewhere else? Click Here
Stock # 79538-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Atlas Copco QCM2 Series Servo Controller

Features
  • LED Indicators
  • 2000 Samples per Trace Storage
  • Commissioning and Operation Modes

Description

The Atlas Copco QCM2 Series Servo Controller is designed to be used as a part of the Enhanced miniMACS System. The QCM2 is a master unit, meaning that it features an internal power supply. The QCM2 goes through a series or processes called Tightening Cycles, through which the servo drive stores measured torque and angles values in its internal memory with a resolution of 1ms/sample. There are a total of ten LED indicators on the front of the Servo Unit, which are used to maintain clarity of the status of the unit.

On the QCM2, there is a digital I / O port that is designed for testing and commissioning. There are two modes available via this port: Operation Mode and Commissioning Mode. Operation Mode is considered to be the standard running mode for the QCM2 Servo unit. When using Operation Mode, the discrete I / O is disabled and replaced by the Lan1 signalling FBU Profibus interface. Commissioning Mode is selectable by setting digital input X7A:8 to logic one. When this process is completed, control over the Lan1 bus is disabled and the servo drive unit used discrete I / O signalling instead. Commissioning mode is only intended for use in low level testing and debugging purposes with reduced functionality.


Product Family: QCM2


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Atlas Copco QCM2 Series Servo ControllerAtlas Copco QCM2 Series Servo ControllerAtlas Copco QCM2 Series Servo Controller
Atlas Copco QCM2 Series Servo ControllerAtlas Copco QCM2 Series Servo Controller


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Atlas Copco QCM2 Manual (pdf) 
Link to Atlas Copco Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 79538-1 - Atlas Copco QCM2-T 340 15 Servo Controller


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html