National Instruments USB-8476 1-Port USB LIN Interface
  • National_Instruments_USB_8476_View1_20198195135
  • National_Instruments_USB_8476_View2_20198195135
  • National_Instruments_USB_8476_View3_20198195135
  • National_Instruments_USB_8476_View4_20198195135

National Instruments USB-8476 1-Port USB LIN Interface



Configuration:
• Transceiver: ATA6620
• Physical Layer: LIN
• Maximum Transfer Rate: 20 kb/s

Part Number: 194210D-22L, 194210E-22L




Have a quote from somewhere else? Click Here
Stock # 79577-4
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
National Instruments USB-8470 Series 1-Port USB CAN and LIN Interfaces

Features
  • 500 V Digital Isolation
  • LIN 1.3 2.0 and J2602 Compliance
  • High-Speed USB Compliant and Bus-Powered
  • Support for CAN 2.0A and Extended CAN 2.0B Arbitration ID

Description

The National Instruments USB-8470 Series 1-Port USB CAN and LIN Interfaces are designed to provide high-speed USB interfaces for connecting your PC to controller area network (CAN) or local interconnect network (LIN) networks and devices. With its optional hardware synchronization versions, the National Instruments USB-8470 Series 1-Port USB CAN and LIN Interfaces will feature a three-pin COMBICON synchronization connector. With this connector, the user can use 1 MHz, 10 MHz, or 20 MHz clocks to synchronize the internal hardware timebase with other devices such as USB CAN; USB LIN; and National instruments data acquisition, motion, and vision hardware. This form of synchronization will eliminate clock drift between devices and enable triggering between devices for correlating CAN data with data from other devices.

The National Instruments USB-8470 Series interfaces are ideal for a wide variety of applications, including monitoring and logging in-vehicle networks, bus load monitoring, device validation with synchronized data acquisition, CAN device development and test, and correlating CAN and LIN data with external measurements. The convenient all-in-one design of the USB-8470 Series features a captive 2 m USB cable and built-in transceiver, requiring no extra cables or accessories to get applications running quickly. With hardware time-stamping, the user can log messages with microsecond-accurate timestamps for reconstructing network events and correlating data across synchronized devices.


Product Family: USB-8470, USB8470, USB 8470


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

National Instruments USB-8470 Series 1-Port USB CAN and LIN InterfacesNational Instruments USB-8470 Series 1-Port USB CAN and LIN InterfacesNational Instruments USB-8470 Series 1-Port USB CAN and LIN Interfaces


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 79577-4 - National Instruments USB-8476 1-Port USB LIN Interface


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html