Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier
  • DynamicEngineering_cPCI2PMC_View1
  • DynamicEngineering_cPCI2PMC_View2
  • DynamicEngineering_cPCI2PMC_View3

Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier



This Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier is used and in excellent condition.

Configuration:
• J2 Installed Upper PCI Bus
• Partial IO (Ethernet and I2C)
• IO through Bezel (Front Panel)




Have a quote from somewhere else? Click Here
Stock # 79934-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier Converter Card

Features
  • 32 or 64-Bit Operation on Either Bus
  • Universal cPCI 3U
  • Status Indicator LED's
  • User Selectable Secondary VIO

Description

The Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier Converter Card provides the ability to install a PMC card into a standard cPCI slot. cPCIBPMC3U64 has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/66 MHz bus operation, the 3U card is wired for 64-bit PCI operation with pull-ups on the control lines to allow use in a 32-bit system. The PMC bezel connector is mounted though the cPCI mounting bracket.

The PCI bus is interconnected to the PMC via 64-bit 66 MHz capable layout. The slower and more narrow device will determine the interface characteristics. The supplied DIP-switch is used to control the bridge configuration. The user can select the clock rate, 33/66 on both buses and has access to the GPIO bits. PME and the Interrupt request lines are routed from the PMC to the cPCI connector. The PCI VIO is interconnected to the primary side of the bridge. The secondary side of the bridge has programmable VIO allowing 5V PMCs to be used in 3V systems and vice-versa. The voltage select pins are not installed on the cPCIBPMC. The bridge will automatically adapt to the PCI bus reference voltage. Many PMCs are "universal" and can work with 3.3 or 5V cPCI backplanes. The secondary side has a shunt for the user to select 5V or 3V operation.


Product Family: cPCIBPMC3U64


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier Converter CardDynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier Converter CardDynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier Converter Card


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 79934-1 - Dynamic Engineering cPCIBPMC3U64 cPCI to PMC Adapter Carrier


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html