Measurement Computing / ComputerBoards CIO-DAS16 Series Data Acquisition Controller
- Data Acquisition at 110KHz
- Fully Programmable Gain
- Smaller Footprint
- Fewer Components
- Consumes only 5V from PC
The Measurement Computing / ComputerBoards CIO-DAS16 Series Data Acquisition Controller is 100% compatible with the DAS-16 analog input. It is smaller, acquires data faster and consumes less power.
The CIO-DAS16 Series provides 16 single-ended or 8 differential channels of 12-bit analog input, three 16-bit counter channels, and eight digital I/O channels. Analog input ranges are software selectable for Bipolar or Unipolar polarity. Bipolar input ranges are ±10 V, ±5 V, ±2.5 V, ±1.25 V, and ±0.625 V. Unipolar input ranges are 0 to 10 V, 0 to 5 V, 0 to 2.5 V, 0 to 1.25 V, and 0 to 0.625 V. Analog input ranges are software programmable. The analog input mode is switch-selectable for single-ended or differential mode. The DMA level is switch-selectable for either 1 or 3. The frequency of the source applied to the on-board pacer is jumper-selectable for either 1 MHz or 10 MHz. The base address is selectable via on-board dip switches.
Product Family: CIO-DAS16, CIO-DAS16 JR, CIO-DAS16JR
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.