Tek Microsystems FP-Serial2-485 FastPack Serial I/O Industry Pack Module
Features
- Data Transfer up to 10 Mb/s
- Dual-Clock Synthesizer for Generation of Baud Rates
- Clock Extraction Function
- Each Channel can be Configured for Half or Full Duplex Operation
- Two Interrupt Levels
Description
The Tek Microsystems FP-Serial2-485 FastPack Serial I/O Industry Pack Module provides two channels of high-speed Serial I/O using EIA-422/485 signal levels. The FP-Serial2-485 is based on the Zilog Z16C30 dual USART with additional support from TEK's SmartSerial controller chip. The SmartSerial controller gives the FP-Serial2-485 the fastest possible IP interface to the Z16C30, including dynamic wait states based on IP clock speed and write-posting for better bus utilization. The SmartSerial controller also extends the asynchronous data rate of the Z16C30 from 625 Kbps to 2.5 Mbps by providing a high speed clock extraction circuit. The use of an external clock allows data rates as high as 10 Mbps. Each communications channel has its own PLL-based clock synthesizer for generation of arbitrary baud rates with little or no error.
Product Family: FPSerial2485, FP-Serial2-485, FP Serial2 485, FPSerial2-485
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.