Ribbon / Performance Technologies / Ziatech ZT-8953 IDE Interface Module
  • Ziatech_ZT8953_View2
  • Ziatech_ZT8953_View1
  • Ziatech_ZT8953_View3
  • Ziatech_ZT8953_View4

Ribbon / Performance Technologies / Ziatech ZT-8953 IDE Interface Module



Includes
• 6 inch Ribbon Cable





Have a quote from somewhere else? Click Here
Stock # 80777-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Ribbon / Performance Technologies / Ziatech ZT 8952 / 8953 IDE Interface and Mounting Board

Features
  • STD 32 Bus Compatible
  • 4 Mbytes/Second Backplane Transfer Rate
  • Frontplane Interrupt Capability
  • 16-bit/8-bit Dynamic Data Transfer Capability

Description

The Ribbon / Performance Technologies / Ziatech ZT 8952 / 8953 IDE Interface and Mounting Board is an Integrated Drive Electronics (IDE) interface for the STD 32 buses that support PC-AT technology disk drives. The ZT 8952 also serves as a mechanical mounting board for the drive, allowing for a modular plug-in unit for the STD bus. The ZT 8952 supports 2.5 inch disk drives, while the ZT 8953 supports 3.5 drives, both mounted directly to the board. The ZT 8952 / 8953 is also available with no drive mounted (ZT 8952-0 / ZT 8953-0) for applications that require remote mounting of the drive. Cables are restricted to 18 inches in length from controller to drive. The ZT 8952 / 8953 will support up to two drives.

Mechanically, the ZT 8952 8953 is compatible with the STD 32 Bus Specification. The ZT 8952 / 8953 supports 8 MHz and 5 MHz STD-80 timings, as well as STD 32 transfers. Both 8-bit and 16-bit transfers are supported under STD 32. The ZT 8952 / 8953 will support up to four Mbytes/second transfer rates on the backplane (one word every four 8-MHz cycles.) The actual transfer rate will vary with the host CPU and drive used.

The PC-AT IDE interface is a 16-bit interface only when transferring data through the 01F0h data register. The ZT 8952 / 8953 supports full 16-bit transfers for STD 32 processors. For 8-bit processors, the ZT 8952 / 8953 will byte pack and unpack the 16-bit IDE transfer to provide 8-bit STD bus transfers. All signals are fully buffered between the STD bus and the IDE interface. The IDE interrupt may be jumpered to drive INTRQ*, INTRQ1*, INTRQ2* (CNTRL*), INTRQ3*, IRQx (STD 32), or one of five frontplane interrupts. Some versions of Ziatech's STD DOS require the use of interrupts.


Product Family: 8952, 8953, ZT 8952, ZT 8953


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Ribbon / Performance Technologies / Ziatech ZT 8952 / 8953 IDE Interface and Mounting BoardRibbon / Performance Technologies / Ziatech ZT 8952 / 8953 IDE Interface and Mounting BoardRibbon / Performance Technologies / Ziatech ZT 8952 / 8953 IDE Interface and Mounting Board


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 80777-1 - Ribbon / Performance Technologies / Ziatech ZT-8953 IDE Interface Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html