National Instruments SHC Series Cables and Cable Adapter
  • ni_shc68_68_epm_view1

National Instruments SHC Series Cables and Cable Adapter

Features

  • Miscellaneous Cables
  • Wide Range of Equipment

View our selection of these items below.


Have a quote from somewhere else? Click Here




Contact Us
Share:



This shielded 68-conductor cable is terminated with two 68-pin female 0.050 series D-type connectors. It features individually shielded analog twisted pairs for reduced crosstalk with high-speed devices. This cable works with all NI 671x Family devices.

Part Numbers: 186838-01, 186838C-01, 186838E-01

These cables can have either latch or thumb screw connectors. If a specific connector is required, please contact Artisan Technology Group Sales for availability.

National Instruments Accessory and Cable Selection Guide (pdf)



Stock # 55024-102




The shielded 68-conductor cable is terminated with two 68-pin female 0.050 series D-type connectors. It features individually shielded analog twisted pairs for reduced crosstalk with high-speed devices. This cable works with all NI 671x Family devices.

Part Numbers: 186838C-01, 186838E-01

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 81254-3




The shielded 68-conductor cable is terminated with an inverted VHDCI 68-pin male connector at one end and a 68-pin female 0.050 series D-type connector at the other end. It features individually shielded analog twisted pairs for reduced crosstalk with high-speed devices.

Part Numbers: 187406-01, 187406B-01

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 64352-5




The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-01, 192061A-01, 192061B-01

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 63734-77




The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-01, 192061A-01, 192061B-01

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 63734-73




The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-02, 192061A-02, 192061B-02, 192061C-02

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 63734-95




The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Number: 192061B-02

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 81254-14




The SHC68-68-EPM is specially designed to work with NI S Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Numbers: 192061-02, 192061A-02, 192061B-02, 192061C-02

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 81254-1


Stock # 81254-4




This is also known as the SHC68M-68F-RMIO.

Part Number: 189588-02, 189588B-02, SHC68M-68F-RMIO



Stock # 81254-7




This cable is used to connect M Series DAQ devices to 68-pin accessories and signal conditioning systems. It features individually twisted cable pairs but does not have shields between the analog and digital signals.

Part Number: 191945-02, 191945B-02, 191945C-02



Stock # 63734-116




This cable is used to connect M Series DAQ devices to 68-pin accessories and signal conditioning systems. It features individually twisted cable pairs but does not have shields between the analog and digital signals.

Part Number: 191945-02, 191945B-02, 191945C-02



Stock # 81254-8




This is a shielded single-ended cable for high-speed digital devices.

Part Number: 188142G-01




Stock # 63734-21




This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Number: 186380C-0R5

National Instruments Counter/Timer Accessories and Cables (pdf)





Stock # 81254-10




This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Numbers: 186380-0R5, 18630B-0R5, 186380C-0R5, 186380D-0R5

National Instruments Counter/Timer Accessories and Cables (pdf)





Stock # 63734-29




This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Number: 186380C-02

National Instruments Counter/Timer Accessories and Cables (pdf)



Stock # 63734-62




This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Number: 186380C-02

National Instruments Counter/Timer Accessories and Cables (pdf)



Stock # 81254-13




This unit connects National Instrument Controllers to MID-76xx motor drives, SSR cable adapter, MCA-7724, or UMI-7774/2. It features a 68-pin VHDCI offset male connector on both ends.

Part Number: 186380-02, 186380C-02, 186380D-02

National Instruments Counter/Timer Accessories and Cables (pdf)



Stock # 63734-114




This cable ships in the original manufacturer's box with a user guide.

Part Number: 192681B-1R5, 192681-1R5



Stock # 63734-51




The cable is meant for connection to generic 68-pin accessories. Use the SHC50-68 to connect the NI 5411 and NI 5431 to the SCB-68 and TBX-68 connector blocks.

Part Number: 184748A-01

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 55024-101




The SHC68-68-EPM is specially designed to work with NI X Series and M Series data acquisition (DAQ) devices. The cable includes separate digital and analog sections, individually shielded twisted pairs for analog inputs, individually shielded analog outputs, and twisted pairs for critical digital I/O. It features a 68-position 0.050 series D-Type connector to 68-position VHDCI connector.

Part Number: 192061B-0R5, 192061-0R5

National Instruments Accessory and Cable Selection Guide (pdf)





Stock # 81254-11




This unit is a shielded 68-conductor cable terminated with a 68-pin male VHDCI connector at one end and unterminated bare wires at the other.

Configuration:
Length: 2 Meters

Part Number: 189041-02, 189041B-02



Stock # 63734-109



  • Description
  • Tech Specs
  • Datasheets / Manuals 
Contact Us
Share:

Description

This page is a list of National Instruments SHC Series miscellaneous cables spanning all categories.

Product Family: SCH
Contact Us
Share:

Specifications

Contact Us
Share:

Resources

Manuals, Datasheets, Drivers, Links

National Instruments SHC68-C68-D4 Datasheet (pdf) 
Link to National Instruments Website