Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply
  • ElmaBustronic_101_View1
  • ElmaBustronic_101_View2
  • ElmaBustronic_101_View3
  • ElmaBustronic_101_View4

Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply



This Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply (Part Number 111-00043-350-64X-05) is used and in excellent condition.

Configuration:
• Product: V64x with Electronic Daisy Chain
• Form: 6U
• Slots: 5
• Power Interface: 10 Pin Power Tap with 6/32 Screw
• J1 Connectors and Shrouds: 160 Pin, 5mm without Shrouds, All Slots
• J2 Connectors and Shrouds: 160 Pin, 13mm with Shrouds, All Slots
• J0 Connector and Shrouds: 95 Pin (19 x 7 Position 17mm with Shrouds)

Input Power: 85-264VAC





Have a quote from somewhere else? Click Here
Stock # 81890-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Elma / Bustronic VME64x Backplane

Features
  • 10-Layer Controlled Impedance Stripline Design
  • Active BUSGRANT, IACK Daisy Chain
  • Power Connections at Bottom for Easier Cabling
  • Superior Power Distribution
  • Virtually Zero Crosstalk
  • Backplane Stiffeners to Provide Durability, Reliability

Description

The Elma / Bustronic VME64x Backplane is designed to fully comply with the ANSI/VITA VME extension standard. The backplanes provide all standard features required for VME64x compatibility, including 160-pin VME extension connectors in J1 and J2, all defined ground pins connected to a ground plane, routing and termination of all VME and VME64x bussed signal lines, geographic address pins, distribution of +5V, +3.3V, ±12V, ±V1, ± V2, and VPC, all on a single monolithic printed circuit board with J1 and J2 included. Additional features include active, electronic IACK/BUSGRANT daisy chaining standard; onboard, inboard termination; distributed high frequency capacitors for each slot, distributed low frequency capacitors; five signal layers, five power and ground planes.

Elma / Bustronic constructs the board in ten layers — five signal layers, five power and ground planes. The backplanes incorporate a full stripline design, generously distributed decoupling capacitors, inboard termination, 2 oz. power and ground planes, transient analysis simulation programs.

The standard design features three 2 oz. copper ground planes, which fully shield the backplane, minimize EMI/RFI emissions susceptibility, minimize crosstalk, and maximize power distribution. In addition, the robust outer ground layers provide mechanical and EMI/RFI protection for the backplane.

Two 2 oz. copper VCC planes, allow the backplanes to maximize power distribution while they act as virtual ground planes for the signals in order to minimize noise and crosstalk. The high frequency decoupling capacitors at every slot and distributed low frequency electrolytic capacitors across the board also help this effort. Measured results verify that Elma / Bustronic backplanes are among the quietest in the industry.

The combination of multiple 2 oz. copper layers of VCC and ground, plus the distributed capacitors allows Elma / Bustronic backplanes to provide superior power distribution. Additionally, there are multiple, well-distributed power bugs to virtually eliminate voltage drop across the backplane. There is also a utility connector that allows minimal power insertion and provides access to status signals, including ACFAIL, RESET, and SYSFAIL.


Product Family: VME64x, 101V64XM05, 1O1V64XMO5, VME64


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Elma / Bustronic VME64x BackplaneElma / Bustronic VME64x BackplaneElma / Bustronic VME64x Backplane
Elma / Bustronic VME64x Backplane


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 81890-1 - Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html