Teledyne / LeCroy / Catalyst PCIAX-532 Extender Board
  • Catalyst_PCIAX3571_View1
  • Catalyst_PCIAX3571_View2
  • Catalyst_PCIAX3571_View3
  • Teledyne_LeCroy_Catalyst_PCIAX_532_View1_20141218121615

Teledyne / LeCroy / Catalyst PCIAX-532 Extender Board



This Teledyne / LeCroy / Catalyst PCIAX-532 Extender Board is used and in excellent condition. This unit does not include the faceplate.

Configuration:
• 5V Key and Universal Connector

Part Number: 384-0011-004, PCIAX-3571

View Photo of 5 V key and universal connector.




Have a quote from somewhere else? Click Here
Stock # 82373-2
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Teledyne / LeCroy / Catalyst PCIAX Extender Boards

Features
  • Less than 500 ps Propagation Delay
  • Allows HOT SWAPPING or LIVE INSERTION
  • Use Quick Switch for On / Off Operation
  • Continuous Monitoring to Eliminate Spikes

Description

The Teledyne / LeCroy / Catalyst PCIAX Extender Boards allow HOT SWAPPING or LIVE INSERTION of the Unit-Under-Test into PCI (CompactPCI for CPCI-64) bus. The “HOT SWAPPING” feature of these extenders eliminates the need for turning the PC Off and On and repeated rebooting. This feature speeds up rework, characterization, and test of Unit-Under-Test in the development phase, as well as production test. The elimination of the repeated power cycling also helps prolong the system life and the hard disc operation. These Active Extenders use a new CMOS technology (known as “Quick Switch”) for switching the signals On and Off. These switches feature a very low propagation delay, typically about 250 picoseconds, resulting in no timing degradation between the bus and the Unit-Under-Test. The switches are also bidirectional allowing the entire address range to be supported for both target and master type operation.

These Active Extender boards isolate all signals and voltages to the Unit-Under-Test, when the On-Off switch is in the Off position. All voltages are ramped down and ramped up during the power down and power up in order to eliminate any spikes. During the power down the signals to the bus become isolated as soon as the main supply, +5V, falls to +3.0V. During the power up the signals stay isolated until the main voltage is at least +3.0V.

CPCI-64 and PCIAX Rev B and higher extender boards also allow voltage margin testing of the UUT, by allowing external power supplies to replace the system power supplies as inputs to the Unit-Under-Test.


Product Family: PCIAX532, PCIAX332


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Teledyne / LeCroy / Catalyst PCIAX Extender BoardsTeledyne / LeCroy / Catalyst PCIAX Extender BoardsTeledyne / LeCroy / Catalyst PCIAX Extender Boards


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 82373-2 - Teledyne / LeCroy / Catalyst PCIAX-532 Extender Board


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html