RTD Embedded Technologies DM210 dataModule Analog Input Module
  • RTD_Embedded_Technologies_DM210_View1_2014129105623
  • RTD_Embedded_Technologies_DM210_View2_2014129105623
  • RTD_Embedded_Technologies_DM210_View3_2014129105623
  • RTD_Embedded_Technologies_DM210_View4_2014129105623

RTD Embedded Technologies DM210 dataModule Analog Input Module



This RTD Embedded Technologies DM210 dataModule Analog Input Module is used and in excellent condtion.

Configuration:
• Current Requirements: 75 mA @ +5 V; 12 mA @ +12 V; 28 mA @ –12 V (.83W)





Have a quote from somewhere else? Click Here
Stock # 84077-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
RTD Embedded Technologies DM210 / DM5210 dataModule Medium Speed Analog Input Modules

Features
  • (16) Single-Ended Analog Input Channels
  • 12-Bit, 20 Microsecond A/D Converter
  • ±5, ±10, or 0 to +10 Volt Analog Input Range
  • Resistor Configurable Gain
  • (20) TTL/CMOS 8255 Based Programmable Digital I/O (16 at I/O Connector, 4 at On-Board Pads)
  • (3) Independent 16-Bit, 8-MHz Timer/Counters

Description

The RTD Embedded Technologies DM210 / DM5210 dataModule Medium Speed Analog Input Modules turn your IBM PC-compatible cpuModule or other PC/104 computer into a high-performance data acquisition and control system. It is ultra-compact for embedded and portable applications.

The difference between the DM210 and DM5210 is the power supply requirements: the DM210 requires ±12 and +5 volt power sources and the DM5210 requires a +5 volt source. The following paragraphs briefly describe the major functions of the module.

Analog-to-Digital Conversion

The analog-to-digital (A/D) circuitry receives up to 16 single-ended analog inputs and converts these inputs into 12-bit digital data words which can then be read and/or transferred to PC memory. The analog input voltage range is jumper-selectable for bipolar ranges of -5 to +5 volts or -10 to +10 volts, or a unipolar range of 0 to +10 volts. The module is factory set for -5 to +5 volts. Overvoltage protection to ±35 volts is provided at the inputs. The A/D conversions are performed by a 12-bit successive approximation converter. This high performance converter and the high-speed sample-and-hold amplifier preceding it, make sure that dynamic input voltages are accurately digitized. The resolution of a 12-bit conversion is 2.4414 millivolts and the maximum throughput is 40,000 samples per second. The converted data is read and/or transferred to PC memory, one byte at a time, through the PC data bus.

8254 Timer/Counter

The 8254 programmable interval timer contains three 16-bit, 8-MHz timer/counters to support a wide range of timing and counting functions. The clock, gate, and output pins for each of the three timer/counters are available at the I/O connector.

Digital I/O

The DM210 / DM5210 has 20 TTL/CMOS-compatible digital I/O lines which can be directly interfaced with external devices or signals to sense switch closures, trigger digital events, or activate solid-state relays. The lines are provided by the on-board 8255 programmable peripheral interface (PPI) chip. Sixteen of the lines are brought out to the I/O connector and four are available at a set of on-board pads located near the edge of the module for easy access. The pads for installing and activating pull-up or pull-down resistors are included on the module for the 16 lines brought out to the I/O connector.



Product Family: DM210, DM-210, DM 210, DM21O, DM-21O, DM 21O, DM5210, DM-5210, DM 5210, DM521O, DM-521O, DM 521O


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

RTD Embedded Technologies DM210 / DM5210 dataModule Medium Speed Analog Input ModulesRTD Embedded Technologies DM210 / DM5210 dataModule Medium Speed Analog Input ModulesRTD Embedded Technologies DM210 / DM5210 dataModule Medium Speed Analog Input Modules
RTD Embedded Technologies DM210 / DM5210 dataModule Medium Speed Analog Input Modules


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 84077-1 - RTD Embedded Technologies DM210 dataModule Analog Input Module


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html