Eaton / MTL Instruments MTL5082 Resistance Isolator
  • MTL_Instruments_MTL5082_View1_201524121849
  • MTL_Instruments_MTL5082_View2_201524121849
  • MTL_Instruments_MTL5082_View3_201524121849
  • MTL_Instruments_MTL5082_View4_201524121849
  • MTL_Instruments_MTL5082_View5_201524121849
  • MTL_Instruments_MTL5082_View6_201524121849

Eaton / MTL Instruments MTL5082 Resistance Isolator



This MTL Instruments MTL5082 Resistance Isolator is new and from surplus stock.

The MTL5082 connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring system in the safe area. The module is intended typically (but not exclusively) for use with Pt100 3-wire RTDs. Switches located on top of the module allow selection of 2-, 3-, or 4-wire RTD connection. The MTL5082 should be considered as an alternative, non-configurable MTL5074, for use in RTD applications where a resistance input is preferred or needed instead of 4/20mA. The design is notable for its ease of use and repeatability. The number of wires which can be connected on the safe-area side of the unit is independent of the number of wires which can be connected on the hazardous-area side. The module drives upscale in the case of open-circuit detection.

MTL Instruments MTL5082 Datasheet (pdf)



Have a quote from somewhere else? Click Here
Stock # 84464-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
888-88-SOURCE
Email Customer Service
Email this page
Share:
Eaton / MTL Instruments MTL5000 Series Isolating Interface Units

Features
  • Supplied with Signal and Power Connectors, as Applicable
  • 250V RMS Between Input, Output and Power Supply Terminals
  • Accommodates Conductors of up to 2.5mm2 Stranded or Single-Core

Description

The MTL Instruments MTL5000 Series Isolating Interface Units provide intrinsically safe (IS) communication and signal conditioning for a wide range of hazardous-area devices. Total ac and dc isolation exists between input, output and power supply on separately powered units, and between input and output on loop- powered units. No IS earth is required. DIN-rail mounting and plug-in signal and power connectors simplify installation and maintenance. Units are powered from a 20 to 35V dc supply, or, in some cases, from the signal itself.


Product Family: MLT5000, MLT 5000, MLT-5000, MLT5OOO, MLT 5OOO, MLT-5OOO, MLT5082, MLT 5082, MLT-5082, MLT5O82, MLT 5O82, MLT-5O82


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
888-88-SOURCE
Email Customer Service
Email this page
Share:

Specifications

Contact Us
888-88-SOURCE
Email Customer Service
Email this page
Share:

Item Images

Click a thumbnail to view larger image:

MTL Instruments MTL5000 Series Isolating Interface UnitsMTL Instruments MTL5000 Series Isolating Interface UnitsMTL Instruments MTL5000 Series Isolating Interface Units
MTL Instruments MTL5000 Series Isolating Interface UnitsMTL Instruments MTL5000 Series Isolating Interface UnitsMTL Instruments MTL5000 Series Isolating Interface Units


Contact Us
888-88-SOURCE
Email Customer Service
Email this page
Share:
Manuals, Datasheets, Drivers, Links

• MTL Instruments MTL5000 Manual (pdf) 
• Link to Eaton / MTL Instruments Website 


Contact Us
888-88-SOURCE
Email Customer Service
Email this page
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 84464-1 - Eaton / MTL Instruments MTL5082 Resistance Isolator


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html