Rastergraf / Peritek PMB-P PMC to PCI Adapter Board with On-Board PCI Bridge
  • Rastergraf_Peritek_PMB_P_View1_201525111421
  • Rastergraf_Peritek_PMB_P_View2_201525111421
  • Rastergraf_Peritek_PMB_P_View3_201525111421

Rastergraf / Peritek PMB-P PMC to PCI Adapter Board with On-Board PCI Bridge



This Rastergraf / Peritek PMB-P PMC to PCI Adapter Board with On-Board PCI Bridge is used and in excellent condition.

Configuration:
• Connectors: PMC

Part Number: AE1-00742-1100




Have a quote from somewhere else? Click Here
Stock # 84476-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Rastergraf / Peritek PMB-P Series PMC to PCI Adapter Board with On-Board PCI Bridge

Features
  • 32 and 64-Bit PCI Bus Compatibility
  • Test Points and Power LEDs
  • Optional VME P2 Connector
  • On-Board PCI Bridge
  • Asynchronous Operations at up to 2.5:1 Clock Speed Differential

Description

The Rastergraf / Peritek PMB-P Series PMC to PCI Adapter Board with On-Board PCI Bridge is a single slot PCI board enables any 32-bit or 64-bit PMC (PCI Mezzanine Card) module to be plugged into a standard PCI slot.

The PMB-P is form and fit compatible with Rastergraf / Peritek's PMA-P passive adapter. Its PLX PCI6154 bridge chip is similar to the Intel 21154 but offers extended capabilities, including asynchronous operations at up to 2.5:1 clock speed differential.

The PMB-P is a Universal PCI board that plugs into any PCI slot; 32 or 64 bit, 33 or 66 MHz, 3.3 or 5 Volt VIO. The board’s PMC (local side) slot supports 33 or 66 MHz independent of the host bus, local 32-bit or 64-bit operation, and local clock slaved to the host PCI Clock. Jumpers allow the user to select the operation mode.

Separate power planes are provided for +3.3V and ground. Bypass capacitors are located at regular intervals across the board and at all PMC and PCI power pins, including +12V, -12V, +5V, +3.3V, and VIO. To aid in debugging, the PMB-P has Test Point pins and LED indicators for BUSMODE1, +12V, -12V, +5V, +3.3V and VIO. It also has a connector for the JTAG port. PMC Index Pin holes are provided for both 3.3V and 5V PMC signaling pins so that the PMB-P can be configured for either bus environment.

An optional VME P2-type connector can be included which “breaks out” the User I/O signals on the PMC Pn4 connector. The traces between the Pn4 and the P2 connector are carefully routed for length-matching and reduced crosstalk effects. The PMB-P provides optional local 3.3V gener- ation because many PCI bus machines do not supply it.

The PCI bridge allows the trace lengths to comply with the PCI specifica- tion (something a passive carrier like the PMA-P cannot do) and which some PCI devices require for proper operation at 66 MHz.

Rastergraf / Peritek also makes an active (bridged) dual-PMC site CompactPCI product, the PMB-CPMC-to-CompactPCI adapter. Also available are pas- sive (bridgeless) single PMC slot PCI (PMA-P) and CompactPCI (PMA-C) boards.


Product Family: PMB-P, PMB P, PMBP, PMB-P/P2, PMB P/P2, PMBP/P2


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Rastergraf / Peritek PMB-P Series PMC to PCI Adapter Board with On-Board PCI BridgeRastergraf / Peritek PMB-P Series PMC to PCI Adapter Board with On-Board PCI BridgeRastergraf / Peritek PMB-P Series PMC to PCI Adapter Board with On-Board PCI Bridge


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 84476-1 - Rastergraf / Peritek PMB-P PMC to PCI Adapter Board with On-Board PCI Bridge


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html